03-01-2013, 04:50 PM
AUTOMATIC TECHNOLOGY AUSTRALIA PTY LTD
AUTOMATIC TECHNOLOGY AUSTRALIA PTY LTD.pdf (Size: 1.37 MB / Downloads: 87)
PLEASE READ THESE IMPORTANT SAFETY RULES
Warning - It is vital for the safety of persons to follow all instructions. Failure to comply
with the following Safety Rules may result in serious personal injury and/or property damage.
Thank you for purchasing the ATAAxess Automatic Opener. This
opener is designed to suit commercial heavy duty roller shutter
doors. The components and materials used in this opener are of
the latest technology and highest quality.
OPERATION
To operate the opener simply turn the pendant switch anticlockwise
to open or clockwise to close the door. The open
position allows the door to open fully without having to
constantly hold the switch. For safety the close position requires
continuous contact.
MANUAL OPERATION
The opener is equipped with a unique manual operation device. If
the power to the opener is disrupted for any reason the clutch
disengages and the door can move manually via the manual chain.
When power is restored the clutch re-engages to allow automatic
operation.
FEATURES
DO NOT operate the opener unless the door is in full
view and free from objects such as cars and persons.
Make sure that the door has finished moving before
entering or leaving the driveway.
DO NOT operate the opener when persons are near the
door. Children must be supervised near the door at all
times when the opener is in use. SERIOUS
PERSONAL INJURY and/or property damage can
result from failure to follow this warning.
DO NOT allow children to operate the opener.
SERIOUS PERSONAL INJURY AND/OR
PROPERTY DAMAGE can result from failure to
follow this warning.
Frequently examine the installation, in particular guides
and mountings for signs of wear, damage or imbalance.
DO NOT use if repair or adjustment is needed since a
fault in the installation
PRODUCT DESCRIPTION
DRIVE UNIT INSTALLATION
The ATA Axess Roller Shutter Opener consists of
one drive unit, and pendant switch.
PENDANT SWITCH
Housed in a commercial grade heavy duty enclosure is a
momentary contact switch. A standard 240V AC power outlet is
required to power the system. The enclosure meets the IP55
standard for ingress of dust and water.
MECHANICAL DRIVE UNIT
The drive unit consists of a powerful 240V single phase motor,
rugged gearbox and position encoder. It inlcudes a cluth
mechanism to allow easy manual operation and is rated to IP42
standard.
DRIVE UNIT INSTALLATION MOUNTING THE DRIVE UNIT
The mounting plate holes are slotted for fine adjustment of the
output gear position. Follow the procedure below to ensure final
adjustments can be made later.
1. Determine on which side of the door the opener is to be
mounted.
2. Install manual chain guide as required.
3. Mount the base plate to door bracket either by welding in
place or using M12 hex bolts, washers and nuts.
4. Position opener and secure with M10 fasteners.
5. Mount drive sprocket on shaft in line with door drive gear.
6. Shorten drive chain as required and fit around drive gears.
7. Feed manual chain through guide and over pulley.
8. Shorten chain as required and fix ends to make a loop.