25-08-2017, 09:32 PM
DIGITAL GEAR LEVEL INDICATOR
DIGITAL GEAR LEVEL INDICATOR.doc (Size: 59.5 KB / Downloads: 75)
INTRODUCTION
The main purpose of this project is to indicate the gear level in the vehicle. The main purpose behind adding the level scanning section is to avoid malfunctioning of the receiver section due to battery failure (as no battery is added to the receiver to latch the present level of the gear). When power resumes, the level-scanning section scans and checks all the levels one by one (from 1 to 5) and transmits the corresponding codes to the receiver to show the gear level in the vehicle.
ADVANTAGES
Up to four gear are indicated on LED display
Reverse gear is indicated as the 5th gear with alarm sound
2 inch LED display is used
Power consumption of the circuit is very less
Free maintenance
Easy to identify the gear positions of the vehicle
APPLICATION
All Automobile Application
Two wheeler and four wheeler Applications
It is also used as the water level indication system