12-11-2014, 12:25 PM
Abstracts: In this project we are going to use an accident detection unit which will Be fitted inside the front and rear bonnet of the car.This accident detection unit consists of two metallic plates which are kept at little distance apart from each other. In case of accident, if the car is hit to some other vehicle or an object then due to the impact the two metal plates will come in contact with each other. Due to this a signal will be sent to microcontroller. Once microcontroller (AT89S52) gets signal from metal plates, then it will immediately turn on the buzzer and sand (using GSM sim300) the location data (using GPS) to the emergency service center.