16-08-2012, 10:47 AM
Power-Management Strategies for a Grid-ConnectedPV-FC Hybrid System
1Power-Management.pptx (Size: 163.81 KB / Downloads: 111)
ABSTRACT
This paper presents a method to operate a grid connected hybrid system. The hybrid system composed of a Photovoltaic (PV) array and a Proton exchange membrane fuel cell (PEMFC) is considered.
The PV array normally uses a maximum power point tracking (MPPT) technique to continuously deliver the highest power to the load when variations in irradiation and temperature occur, which make it become an uncontrollable source.
In coordination with PEMFC, the hybrid system output power becomes controllable. Two operation modes, the unit-power control (UPC) mode and the feeder-flow control (FFC) mode, can be applied to the hybrid system.
INTRODUCTION
Renewable energy is currently widely used. One of these resources is solar energy. The photovoltaic (PV) array normally uses a maximum power point tracking (MPPT) technique to continuously deliver the highest power to the load when there are variations in irradiation and temperature.
The disadvantage of PV energy is that the PV output power depends on weather conditions and cell temperature, making it an uncontrollable source.
Furthermore, it is not available during the night. In order to overcome these inherent drawbacks, alternative sources, such as PEMFC, should be installed in the hybrid system.
By changing the FC output power, the hybrid source output becomes controllable.
CONCLUSION
This paper has presented an available method to operate a hybrid grid-connected system.
The hybrid system, composed of a PV array and PEMFC, was considered.
The operating strategy of the system is based on the UPC mode and FFC mode.
The purposes of the proposed operating strategy presented in this paper are to determine the control mode, to minimize the number of mode changes, to operate PV at the maximum power point, and to operate the FC output in its high-efficiency performance band.