04-10-2014, 03:23 PM
Abstracts: This project is discussed about the design and implementation of automatic Water filling system using Microcontroller (8051). This System is suitable for multi-storey building that requires large amount of water for various purposes such as drinking water, washing clothes and many more thus the tank gets empty many a times in a single day.This is a system where a set amount of water level is maintained and as soon as the level is decreased the Machine starts to fill water automatically into tank through a Motor. So in this system, the tank that will be filled with this water will be marked or (levelled) With 3 Sensor where each Sensor will sense different level of water. The Objective of this project is to be applied in water industries and to Automate the water filling process which can save time and cost. This project is the Combination of Relay, LCD, and electrical DC motor system. This project is divided into 3sections; the LCD display section, the Buzzing section, Automatic ON/OFF of motor via Relay and filling of tank section, where the whole sections is controlled by Microcontroller.