18-08-2014, 12:11 PM
Coating powder Cyclone Collector main used for collecting the coating powder. A cyclone collector works on a similar principle where by mechanically forced air is introduced in to the top of the cylinder with cone shaped base. The swirling motion of the air creates a negative pressure drop across the top of the cylinder. This provides a pressure gradient the higher pressure of air in the lower levels of the cone are pulled upward through the exist duct, moving from a region of relative high pressure to the low pressure. At a same time particulate matter in the moving air stream will fall out in accordance with specific gravity is the density of a material divided by the density of standard reference material.
Coating powder Cyclone Collector main used for collecting the coating powder. A cyclone collector works on a similar principle where by mechanically forced air is introduced in to the top of the cylinder with cone shaped base.
The swirling motion of the air creates a negative pressure drop across the top of the cylinder. This provides a pressure gradient the higher pressure of air in the lower levels of the cone are pulled upward through the exist duct, moving from a region of relative high pressure to the low pressure. At a same time particulate matter in the moving air stream will fall out in accordance with specific gravity is the density of a material divided by the density of standard reference material.