25-08-2017, 09:32 PM
Abstracts: The project title is Design and Implementation of Elevator using Verilog based on Field Programmable Gate Array (FPGA). An elevator is a device designed as a convenience appliance that has evolved to become an unavoidable feature of modern day urban life. It is a machine that carries people or goods up and down to different levels in a building or mine. The elevator controller will be fully design on the FPGA board using simple I/O interface on the FPGA board. The project was design on FPGA. The programming language that use for the project is Verilog, which is one of hardware description language (HDL) that can support by FPGA. The software that uses to write the programming language is Xilinx ISE. When the programming design is done, the next step is the simulation of the behavior of the system. The simulation of the program needs to implement on the Xilinx Spartan II FPGA board. This project will build an elevator base on 3 floor building. The elevator will move up and down depend on the request from the user. By using the FPGA the result is will be easily to upgrade due to the reconfigurable of the pin on the FPGA. If the elevator require more floor, it will more easy to redesign.