20-10-2014, 11:00 AM
Abstracts: In most industrial application this percentage can be considerably higher, and most failures are a result of heavy object rotating. We are going to do IDP project in BOSCH REXROTH COMPANY. Company has 1.5 tone capacity machine for rotating object, but company require 3 tone capacity machine. So we have decided to prepare IDP project in Bosch Rexroth India Ltd. Company for preparing 3 tone capacity design. Components used in the machine are as follows: 1. Half-circular plate:- Half- circular plate is so designed such that it should be able to withstand the load of the rectangular block. 2. Roller bearing and shaft:- The roller bearing and shaft will be designed on the basis of the machine capacity. 3. Chain sprocket:-` The chain sprocket design will be done on the basis of the shaft design. The chain sprocket will be selected on the basis of standard design. 4. Motor:- The motor design will be based on the maximum capacity of the machine to rotate the shaft. The motor will be such that the machine can take up the maximum load of 3 TONE.