28-08-2014, 03:36 PM
Network Security is basically used to secure a particular network. In these we deny a particular network. And deny network does not communicate with another network.In these security part we use a ether channels and multilayer switch to block a particular network for a use of port security. In these security part we attach a pc in L3 switch and communicate with its Mac address. Basically in a security part we deny or permit the network or to block a particular network. Which are does not communicate with another network. In these project basically routing is used to route all the networks. In routing we use a OSPF protocol. OPSPF is basically a type of routing. OSPF routing Is a very simple. OSPF is a open source. In these project we configure a serial ports and fastetherrnet ports. In these project devices are used routers ,switch ,Wifi router and cables. Cables are like Straight, serial. In a serial cable there are two types DTE and DCE.