15-05-2014, 10:52 AM
Fabrication of Flexible Tipper System by 3 Axis Pneumatic Modern Trailer
Fabrication of Flexible Tipper.doc (Size: 40 KB / Downloads: 26)
ABSTRACT
Mechanical engineering without production and manufacturing is meaningless and inseparable. Production and manufacturing process deals with conversion of raw materials inputs to finished products as per required dimensions specifications and efficiently using recent technology
Pneumatic three axis trailer are used mainly in construction site as well in industrial site where the place is very less ,here we can unload the material at any side of the trailer .where as in ordinary unloading done at back side only here we can unload the load on left side, right side and backside also, this system is totally operated with the pneaaumatic components with linkage mechanism
In this project, the Control Valve is used to activate/deactivate the Air input. The Valve is ‘ON’ the compressed air goes to the pneumatic cylinder. And then pushes the pneumatic cylinder, so that the Lifting is applied at the time of Valve in “ON” position Each position is actuated with separate valves, but condition is only one axis is operated at one time of instant .The speed of the pneumatic cylinder is varied by using flow control valve. This is the way of controlling Lifting speed of the Trailer