23-06-2011, 09:47 AM
GEAR SHAPER CUTTERS
CTI designs and manufactures spur and helical gear shaper cutters to produce all types of internal and external Gears, Splines, Sprockets and Timing Pulleys. Custom made shaping cutters to cut pre shaved and pre ground gears with profile modifications like protuberance and semi topping can be supplied.
Shaper cutters can be supplied in following types:
Disc Type
Deep Counter Bore
Hub Type
Shank type
GEAR SHAVING CUTTERS and MASTER GEARS
Gear Shaving Cutters are precision ground for finishing pre-hobbed or pre-shaped gears. All tools are supplied with inspection and lead test charts.
Types:
Conventional, diagonal & underpass
Shaving Cutters
Milling Cutter
Involute Gear Cutters are supplied to cut any number of teeth in gears from 0.5 module to 50 module & 64 DP to 0.5 DP with maximum diameter of 360 mm. Conforming to BS 2518, IS 5698 in a set of numbers. Cutters having profile of particular no. of teeth and special milling cutters are also supplied.
Chain sprocket hobs are manufactured from 1/4" pitch to 3" pitch conforming to DIN, BS & as standards in a set of 3 Cutters to cut any no. of teeth in sprockets.
Scalping and Cylindrical Cutters : are manufactured from 6" dia to 8" dia & length from 16" to 20" in light & heavy duty.These are used for scalping copper & brass strips.
Material used is imported high speed steel in M2 & M35 grade.
Side and Face Cutters are supplied from dia 50 mm to 300 mm & width from 5 mm to 50 mm. As per ISS & B85 in M2 & M35 material.Others products includes slitting saws angle cutters.