27-08-2014, 03:24 PM
Graphical User Interface Design In Projects Titled “monster Camera”& “capwap Access Controller” And Database Management In Project
This document provides detail information about the software requirements for Multi sensor fusion (MONSTER) Camera reference design based on TMS320DM8157 (DM8157). The DM8157 is a vision and analytics processing SoC from Texas Instruments with Dual A15, DSPs, EVEs and HW video accelerator for H.264, MPEG4 and JPEG encode and decode. The Camera captures video input from a sensor, processes/encodes the video and streams the encoded video over Ethernet. Its web based management console facilitates configuration of the camera functions and streaming of video and audio data. These requirements are for the MONSTER CAM reference design based on the DM8157. This design provides a comprehensive solution for high-performance multi sensor fusion applications. It provides a high quality solution and enables fast time to market with flexibility for customization. LIST OF SENSORS The MONSTER CAM supports the following sensors: Multiple Sensors which need to be put on front panel: • Main image sensor must support 5M-pixel capture as a minimum. Must be compatible with
This document provides detail information about the software requirements for Multi sensor fusion (MONSTER) Camera reference design based on TMS320DM8157 (DM8157). The DM8157 is a vision and analytics processing SoC from Texas Instruments with Dual A15, DSPs, EVEs and HW video accelerator for H.264, MPEG4 and JPEG encode and decode. The Camera captures video input from a sensor, processes/encodes the video and streams the encoded video over Ethernet. Its web based management console facilitates configuration of the camera functions and streaming of video and audio data. These requirements are for the MONSTER CAM reference design based on the DM8157. This design provides a comprehensive solution for high-performance multi sensor fusion applications. It provides a high quality solution and enables fast time to market with flexibility for customization. LIST OF SENSORS The MONSTER CAM supports the following sensors: Multiple Sensors which need to be put on front panel: • Main image sensor must support 5M-pixel capture as a minimum. Must be compatible with existing DM385 sensor boards Megapixel (up to 14Mp) capture at reduced frame rate is also required Lenses for the main image sensor: CS mount, similar to 16mm fixed focal length (Example PN#M118FM16) Sensor interface options for both parallel and CSI2 (MIPI) similar to DM385 IPNC design Stereo 3D sensor Dual sensor configuration with initial target to use Aptina AR0132 RCCC format sensors. Fixed focal length lenses for stereo sensors to be provided RADAR sensor TOF sensor OPT9220 based TOF sensor implementation. 5m range, 75-degree FOV, 10mm resolution for HMI and 10cm for human detection Thermopile sensor Mechanical design target is Omron MEMS 16x16 thermopile sensor module PIR sensor Supplier to provide Video Surveillance-quality suggestion Stereo MICs This will be used for stereo audio processing and audio analytics