30-10-2014, 02:37 PM
Abstracts: Wheels are mandatory requirement to run the vehicle. Whole weight of body, chassis, frames, transmission system, etc. are supported on wheels. Though all the loads are acting on wheel, it must be too strong. In previous days spokes wheels were used in motorcycles, bicycles. Disc wheel were used in cars. But now a days mag wheel, alloy wheels are used. As the technology improves instead of steel disc or rim, alloy rim are used. A mag wheel takes place of conventional steel rim. Different materials are use in alloy wheels. Its objective is to reduce the weight of wheel & increase the strength. To reduce stresses & forces acting on wheel without affecting vehicle speed & efficiency, “HUBLESS WHEEL” is designed. Conventional steel disc wheels and mag wheel contains hub at the centre which support whole weight of vehicle. But hubless wheel is hollow from inside. The suspension system will be supported on bearing with additional provision, and it will satisfy fashion requirement of customers.