29-01-2013, 12:15 PM
How to interface GSM Module with 8051 microcontroller (AT89C51) using PC and LCD
1How to interface.docx (Size: 133.44 KB / Downloads: 48)
ABSTRACT
This project is an extension of interfacing microcontroller with hyperterminal and GSM module. The previous project explained a way to interface a GSM module with 8051 microcontroller where the information response and result codes received by the controller were sent back to computer to display them at HyperTerminal. In this project, the same output is displayed on a 16x2 LCD interface.
This project adds a feature to display the information response and result codes on a 16x2 LCD in response to the AT commands sent through the HyperTerminal of computer. The characters typed at HyperTerminal get transmitted serially through the transmit pin (Tx) of RS232 interface. The overall connection layout is depicted below.
LCD
LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications. A 16x2 LCD display is very basic module and is very commonly used in various devices and circuits. These modules are preferred over seven segments...
MAX232
The MAX232 IC is used to convert the TTL/CMOS logic levels to RS232 logic levels during serial communication of microcontrollers with PC. The controller operates at TTL logic level (0-5V) whereas the serial communication in PC works...