01-02-2013, 10:20 AM
Introducing the Course on Basic Electrical
1Basic Electrical.pdf (Size: 161.66 KB / Downloads: 106)
Introduction
Welcome to this course on Basic Electrical Technology. Engineering students of almost all disciplines has to undergo this course (name may be slightly different in different course curriculum) as a core subject in the first semester. It is needless to mention that how much we are dependent on electricity in our day to day life. A reasonable understanding on the basics of applied electricity is therefore important for every engineer.
Apart from learning d.c and a.c circuit analysis both under steady state and transient conditions, you will learn basic working principles and analysis of transformer, d.c motors and induction motor. Finally working principles of some popular and useful indicating measuring instruments are presented.
The course can be broadly divided into 3 major parts, namely: Electrical circuits, Electrical Machines and Measuring instruments. The course is spread over 10 modules covering these 3-parts, each module having two or more lessons under it as detailed below.
Generation, transmission and distribution of electric power: an overview
This lesson highlights conventional methods of generating 3-phase, 50 Hz electrical power, its transmission and distribution with the help of transmission lines and substations. It will give you a feel of a modern power system with names and function of different major components which comprise it.
DC circuits
This module consists of seven lessons (2.1-2.7) starting with the fundamental concepts of electric circuit (active and passive) elements, circuit laws and theorems that established the basic foundation to solve dc network problems or to analyze the voltage, current and power (delivered or absorbed) in different branches. At the end of each lesson a set of problem is provided to test the readers understanding. Answers to these problems are located therein. The contents of each lesson are described below.
DC transient
The study of DC transients is taken up in module-3, consisting of two lessons (3.1 and 3.2). The transients in a circuit containing energy storage elements occur when a switch is turned on or off and the behavior of voltage or a current during the transition between two distinct steady state conditions are discussed in next two lessons. At the end of each lesson some problems are given to solve and answers of these problems are located therein. The contents of each lesson are described below.
Study of DC transients in R-L and R-C circuits
This lesson is concerned to explore the solution of first order circuit that contains resistances, only single energy storage element inductance or capacitance, dc voltage and current sources, and switches. A fundamental property of inductor currents and capacitor voltages is discussed. In this lesson, the transient and steady state behavior in a circuit are studied when a switch is turned on or off. The initial condition, the steady solution and the time constant of the first order system are also discussed that uniquely determine the system behavior. The solution of differential equation restricted to second order dynamic systems for different types of forcing function are included in Appendix of this, lesson. Some problems are solved and their dynamic responses are plotted.
Study of DC transients in R-L-C circuits
The solution of second order circuit that contains resistances, inductances and capacitances, dc voltage and current sources, and switches is studied in this lesson. In this lesson, the transient and steady state behavior of a second order circuit are studied under three special cases namely, (i) over damped system (ii) critically damped system (iii) under damped system that can arise depending upon the values of circuit parameters. Some examples are solved and their dynamic responses are shown.
Ideal single phase transformer
Clear concept of ideal transformer goes a long way to understand the equivalent circuit representation of a practical transformer discussed in the next lesson. In ideal transformer all kinds of losses are neglected and permeability of core is assumed to be infinitely large. To have a rough and quick estimate of primary current for a given secondary current of a practical transformer one need not consider detail equivalent circuit but rather pretend that the transformer is ideal and apply simple relation of ideal transformer.
Properties of ideal transformer and its principle of operation along with phasor diagram are discussed both under no load and load condition.
Practical single phase transformer
A practical transformer has various losses and leakage impedance. In this lesson, it has been shown how these can be taken into account in the equivalent circuit. Phasor diagrams under no load and load condition developed. Concept of approximate equivalent circuit discussed and meaning of equivalent circuit referred to primary and secondary side are explained.
Testing, efficiency and regulation of transformer
Two basic tests called open circuit and short circuit test are discussed and then it is explained how equivalent circuit parameters of a single phase transformer can be obtained from the test data. Importance of selecting a particular side for a particular test is highlighted.
Importance of efficiency and regulation are discussed and working formula for them derived. Concept of all day efficiency for distribution transformer is given. Regulation is essentially a measure of change of magnitude of the secondary voltage from no load to full load condition and its value should be low. From the expression of regulation it is easily identified the parameters on which it depends.