19-04-2014, 11:33 AM
JT Series Bevel Gearbox
Reversible Bevel Gearbox
General Information
Standard JTT25, JTT32, JTT40, JTT45, JTT50, JTT60 models reversible bevel gearbox which are used
in transversal, clutch and change direction. Input shaft rotation direction remains unchanged, forward
rotation, reverse rotation or no rotation for output shaft rotation direction selection. There are single ouput
shaft, double output shaft, when double output shafts, one output shaft no roration and another rotation
adjustable, double output shafts stop or rotation together adjustable, the double output shafts rotation
direction can be the same or opposite. Normally, gear ratio 1:1, for other gear ratios, please contact our
engineers
JT series bevel gearbox is also widely application in printing press, plastic extruder, sewage auger,
bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling equipment,
material handling, web finishing, paper conveying, conveyor, cardboard box equipment, packaging,
satellite dish antennas, gate valve actuators, business form press, feed screw drive, sewage
conveyor, collating machinery, mixing equipment, conveyor drive, film processor and pottle
packaging equipment. Whatever your goal is to blend, blow, bottle, crank, cut, convey or the task is to
press, propel or raise, JT series bevel gearbox is welcomed and ideal power transmission solution
with all these industries.
Lubrication
All bevel gearboxes are factory tested prior to shipment. They include the correct amount of oil
unless specified by the customer to be shipped dry. Shaft bearings are splash lubricated and partially
submerged in oil when the bevel gearbox is mounted horizontally. After installation, remove the
dipstick and verify correct oil level. If no dipstick is provided, determine level by any appropriate
method. In general, the oil level should be approximately half the depth of the bevel gearbox (to the
parting line) for horizontal mounting, or to the shaft centerlines, if mounted other than horizontally