13-10-2012, 10:46 AM
Dyna SMD
ABSTRACT
This is DC Signal Isolators are designed to isolate DC input signals and provide
isolated DC signal output/s with programmability for inputs/ranges. Dyna SMD
has a 4digit
7segment
LED for display the input/output etc. and membrane keyboard for programming
and calibration purposes. This instruments accept standard DC mA and voltage signals, input
from temperature sensors (PT100
RTDs, thermocouples J,K,R,S,T,B).The input signals are
selectable and their ranges programmable by user. Output 420
mADC (maximum load 750
ohms). RS485
serial communication option allows connectivity to PCbased
DAS/SCADA/HMIsystems.