13-09-2014, 02:02 PM
MHD power station
MHD power.doc (Size: 511 KB / Downloads: 29)
INTRODUCTION
It is well known that man had always been trying to fined something new to achieve a new aims 80% of total electricity produced in the world is hydral while remaining 20% is produced from nuclear, thermal, solar, Geothermal energy and from magneto hydro dynamic power generation.
MHD power generation is a new system of electric power generation which is said to be of high efficiency and low pollution. In advanced countries MHD generator are widely used but in developing countries like India it is still under construction. This construction work is in progress at Tiruchirapalli in Tamilnadu unders joint efforts of BARC (Bhabha Atomic Research Centre), BHEL, Associated cement corporation and Russian technologists.
As its name implies, magneto-hydro-dynamic (MHD) is concerned with the flow of conducting fluid in presence of magnetic and electric field. This fluid may be gas at elevated temperature or liquid metal like sodium or potassium. A MHD generator is a device for converting heat energy of fuel directly into electric energy without a conventional electric generator. The basic difference between conventional generator and MHD generator is in the nature of conductor.
PRINCIPLE OF MHD POWER GENERATION
The principle of MHD generation is simple, discovered by faraday when an electric conductor moves across a magnetic field, a emf. Is induced in it, which produced an electric current. This is the principle of the conventional generator also, where the conductors consists of copper strips. In MHD generator the solid conductors are replaced by a gaseous conductor; i.e. an ionized gas. If such gas is passed at high velocity through a powerful magnetic field, i.e. suppose we have a charged particle (having charge q) moving at a high velocity ‘V’ towards right and a perpendicular magnetic field is applied. A magnetic force ‘F’ acts on the charged particle. Show in fig. A Positively charged particles as forced upward and negatively charged particle is forced downward.
The positive ions would be accelerated towards the upper plate P, and negative ions would be accelerated towards the plate P2 . If the P1 and P2 are externally connected through a resistance, a current would flow through the resistance. Thus gas energy directly converted into electrical energy. This is the principle of MHD generator. A MHD conversion is known as direct energy conversion because it produced electricity directly from heat source without the necessity of the additional stage of steam generation as in a steam power plant.
MHD SYSTEM
There are two types of MHD System
1.) Open cycle System
2.) Closed cycle System
In open cycle system the working fluid after generating electrical energy is discharged to the atmosphere through a stack. In a closed cycle system the working fluid is recycled to the heat sources and thus used again and again. The operation of MHD generator directly on combustion products in an open cycle system. In open cycle system working fluid is air. In closed cycle system helium or argon is used as the working fluid.
CONCLUSIONS
With the increased industrial and agricultural activities, power demand is also highly increased. In the country is sure to fall short of the energy demand by the first decade of next century. This means an additional capacity of power is required next 10 year. The answer to this is in non conventional energy.
The MHD power generation is in advanced stage today and closer to commercial utilization significant progress has been made in development of all critical component and sub system technologies coal burning MHD combined steam power plant promise significant economic and environmental advantages compared to other coal burning power generate technologies. It will not be long before the technological problem of MHD generate are overcome and MHD power generation transform itself from non-conventional to conventional energy sources.