04-10-2016, 03:01 PM
1457698367-PASSWORDBASEDCIRCUITBREAKERUSINGGSMANDSTEPPERMOTOR.docx (Size: 1.31 MB / Downloads: 4)
ABSTRACT
Objective:
The objective of this project is to control the GSM based stepper motor direction control.
Scope:
The scope of this project is to control circuit breaker using Stepper motor and GSM.
Brief methodology:
This project is designed with
GSM Modem
PIC Microcontroller
Stepper motor
Stepper motor driver circuit
In this project stepper motor is used to control the direction in circuit breaker to set the equal password by using GSM. So the GSM output is give to input of microcontroller. In PIC microcontroller we have already programmed the set password and direction to move stepper motor. We will set the particular delay to rotate the stepper motor. Here the microcontroller is the flash type reprogrammable microcontroller in which we have already programmed.
The microcontroller rotates the motor depending upon the setting delay. Now display displays the direction of the motor.
Conclusion:
Now a day’s computers are very essential to human life. Even in every house there is a computer world wide, by using a computer, we can do many works, something like calculator, browsing a web page, using a telephone line etc. It is one of the effective speed control compare than others. This project is very useful to the industrial company in which we can control the machineries those whose have stepper motor attached with machineries