27-06-2014, 03:27 PM
A PAPER PRESENTATION SIX STROKE DIESEL ENGINE
A PAPER PRESENTATION ON.docx (Size: 637.46 KB / Downloads: 35)
ABSTRACT
The increasing demands for low emissions and low fuel consumption in modern combustion engines requires improved methods for combustion process. The Beare Head is a new type of six-stroke engine head design known as the “Beare Head” after its designer, Malcolm Beare. The Beare Head uses a piston and ports very much like a two stroke engine to replace the overhead valve system that is found in four stroke engines today. The four-stroke block, piston and crankshaft remain unaltered. This combination of two stroke and four-stroke technology has given the technology its name the “six stroke engine”.
Six Stroke engine, the name itself indicates a cycle of six strokes out of which two are useful power strokes. According to its mechanical design, the six-stroke engine with external and internal combustion and double flow is similar to the actual internal reciprocating combustion engine. However, it differentiates itself entirely, due to its thermodynamic cycle and a modified cylinder head with two supplementary chambers: combustion and an air heating chamber, both independent from the cylinder. In this the cylinder and the combustion chamber are separated which gives more freedom for design analysis. Several advantages result from this, one very important being the increase in thermal efficiency.
It consists of two cycles of operations namely external combustion cycle and internal combustion cycle, each cycle having four events. In addition to the two valves in the four stroke engine two more valves are incorporated which are operated by a piston arrangement
INTRODUCTION
The majority of the actual internal combustion engines, operating on different cycles have one common feature, combustion occurring in the cylinder after each compression, resulting in gas expansion that acts directly on the piston (work) and limited to 180 degrees of crankshaft angel.
According to its mechanical design, the six-stroke engine with external and internal combustion and double flow is similar to the actual internal reciprocating combustion engine. However, it differentiates itself entirely, due to its thermodynamic cycle and a modified cylinder head with two supplementary chambers: Combustion, does not occur within the cylinder but in the supplementary combustion chamber, does not act immediately on the piston, and it’s duration is independent from the 180 degrees of crankshaft rotation that occurs during the expansion of the combustion gases (work)
ANALYSIS OF SIX STROKE ENGINE
Six-stroke engine is mainly due to the radical hybridization of two- and four-stroke technology. The six-stroke engine is supplemented with two chambers, which allow parallel function and results a full eight-event cycle: two four-event-each cycles, an external combustion cycle and an internal combustion cycle. In the internal combustion there is direct contact between air and the working fluid, whereas there is no direct contact between air and the working fluid in the external combustion process. Those events that affect the motion of the crankshaft are called dynamic events and those, which do not effect are called static events
CONSTRUCTIONAL DETAILS
The sketches shows the cylinder head equipped with both chambers and four valves of which two are conventional (intake and exhaust). The two others are made of heavy-duty heat-resisting material. During the combustion and the air heating processes, the valves could open under the pressure within the chambers. To avoid this, a piston is installed on both valve shafts which compensate this pressure. Being a six-stroke cycle, the camshaft speed in one third of the crankshaft speed
Two expansions (work) in six strokes
Since the work cycles occur on two strokes (3600 out of 10800 ) or 8% more than in a four-stroke engine (1800 out of 720 ), the torque is much more even. This lead to very smooth operation at low speed without any significant effects on consumption and the emission of pollutants, the combustion not being affected by the engine speed. These advantages are
Dramatic reduction in pollution
Chemical, noise and thermal pollution are reduced, on the one hand, in proportion to the reduction in specific consumption, and on the other, through the engine’s own characteristics which will help to considerably lower HC, CO and NOx emissions. Furthermore, it’s ability to run with fuels of vegetable origin and weakly pollutant gasesunder optimum conditions, gives it qualities which will allow it to match up to the strictest standards.
CONCLUSION
There is, at this day, no wonder solution for the replacement of the internal combustion engine. Only improvements of the current technology can help it progress within reasonable time and financial limits. The six-stroke engine fits perfectly into this view. It’s adoption by the automobile industry would have a tremendous impact on the environment and world economy, assuming up to 40% reduction in fuel consumption and 60% to 90% in polluting emissions, depending on the type of the fuel being used.
An allied with the so-responsive pickup and a wide spread of usable power, makes the bike ridiculously easy to ride. You hardly need to use the gearbox, just park it in top gear and ride.