18-08-2014, 10:43 AM
To send a bus without a person, for example while on war. Some times a traveler travels with passenger. It may require knowing the status where and in what condition the bus is hence unmanned bus concept arising. In this project a passenger bus is traveling without a driver. The bus speed is controlled as the nature of road is sensed by the position sensors. If the road is curvy the sensor provides a logic pulse to processor which indicates for low speed and if the road is a straight path the sensor provides a logic pulse to processor, which indicates for higher speed, and if the bus arrives the station, the bus should stop. After the bus is stopped, the simulation for door opening and closing is provided. The system is based on PC and will use 'Visual basic 6.0' as front end & âââ¬ÃÅAssembly languageâââ‰â¢ for microcontroller as back end.
To send a bus without a person, for example while on war. Some times a traveler travels with passenger. It may require knowing the status where and in what condition the bus is hence unmanned bus concept arising. In this project a passenger bus is traveling without a driver. The bus speed is controlled as the nature of road is sensed by the position sensors. If the road is curvy the sensor provides a logic pulse to processor which indicates for low speed and if the road is a straight path the sensor provides a logic pulse to processor, which indicates for higher speed, and if the bus arrives the station, the bus should stop. After the bus is stopped, the simulation for door opening and closing is provided. The system is based on PC and will use 'Visual basic 6.0' as front end & ‘Assembly language’ for microcontroller as back end.