02-05-2014, 02:33 PM
MINI WATER SERVICE STATION
MINI WATER .doc (Size: 62 KB / Downloads: 22)
INTRODUCTION
Mechanization is broadly defined as the replacement of manual effort by mechanical power. Pneumatics is an attractive medium for low cost mechanization particularly for sequential or repetitive operations. Many factories and plants already have a compressed air system, which is capable of providing both the power or energy requirements and the control system (although equally pneumatic control systems may be economic and can be advantageously applied to other forms of power). The main advantages of an all-pneumatic system are usually economy and simplicity, the latter reducing maintenance to a low level. It can also have out standing advantages in terms of safety.
WORKING PRINCIPLE
This hand operated “PORTABLE SERVICING UNIT” is used to clean the light vehicles especially two wheelers and delivers through a nozzle under high velocity. The air is compressed by a hand operated gate valve. The main components are water tank, nozzle, connecting tubes, one way valves and pneumatic air compressor.
The pneumatic air is supplied to the portable service unit water tank by the compressor unit. The high pressure air is then delivered to the water tank through a hose. The water tank (15 liter) has a working capacity of 12 liter. The water tank is provided with a pressure gauge, safety valve, water inlet, and water outlet and air inlet. The pressure water in the tank is delivered through a nozzle at a high velocity.
[b]ADVANTAGES[/b]
Portable in size
easy handling and operation
Low operational cost
Independence from the supply of vacuum or compressed air.
Low Cost Machine