My name is Abdulmajid Ayuba from Nigeria searching for write up and code for my project that is SMS based weather report system. Undergraduate from udusok. Thanks
INTRODUCTION
Over time we have been fascinated by time - studying the signs of change and doing and acting on predictions. Today we can link modern instruments with computers to reduce human error and automate record keeping. The objective of the project is to monitor climatic conditions including atmospheric humidity, atmospheric temperature and the intensity of sunlight through the GSM modem. Local meteorological measurements are extremely important for a wide range of professions, from horticulturists to firefighters. Provides uninterrupted monitoring of various types of applications. For example, it can be used in a greenhouse to control the climate and help promote favorable growth conditions. In solar energy applications, you can check the performance of photovoltaic (PV) systems by monitoring solar radiation, DC power, and other parameters. On green roofs, it can help researchers understand performance by monitoring air temperature, lawn temperature, soil moisture. This project is an excellent combination of analog and digital electronics. The project consists of the monitoring of parameters, the sending of parameters via SMS. GSM interface is one of the main features of the project in which various data such as parameter values, date and time are sent by SMS. We have used the microcontroller as a main component of the project. Now a microcontroller has become a major component of many electronic circuits. Also the liquid crystal display (LCD) and sensors are used on an important basis for visualization and detection purpose. This project consists of two basic modules. First is "Data control" and another is "Send data" A display unit will display the value of the parameters. This will help the person to know the values, for this purpose we will use several sensors, which will be connected to ADC. The other module is referred to as sending parameters. It can be used to send parameter values to a remote location. Let's use a GSM modem. These values can be viewed later using a mobile SMS input box. This system is useful because it is often difficult to measure the values of the parameters manually and also this module is more accurate than the home system.