14-09-2013, 02:19 PM
ADMIXTURES
ADMIXTURES.docx (Size: 14.46 KB / Downloads: 73)
INTRODUCTION
Admixtures are ingredients other than water, aggregates, hydraulic cement, and fibers that are added to the concrete batch immediately before or during mixing. A proper use of admixtures offers certain beneficial effects to concrete, including improved quality, acceleration or retardation of setting time, enhanced frost and sulfate resistance, control of strength development, improved workability, and enhanced finish ability. It is estimated that 80% of concrete produced in North America these days contains one or more types of admixtures. According to a survey by the National Ready Mix Concrete Association, at least 70% of produced concrete contains a water-reducer admixture.
Admixtures vary widely in chemical composition, and many perform more than one function. Two basic types of admixtures are available: chemical and mineral. All admixtures to be used in concrete construction should meet specifications; tests should be made to evaluate how the admixture will affect the properties of the concrete to be made with the specified job materials, under the anticipated ambient conditions, and by the anticipated construction procedures.
Mineral Admixtures
Mineral admixtures (fly ash, silica fume and slags) are usually added to concrete in larger amounts to enhance the workability of fresh concrete; to improve resistance of concrete to thermal cracking, alkali-aggregate expansion, and sulfate attack; and to enable a reduction in cement content.
Chemical Admixtures
Chemical admixtures are added to concrete in very small amounts mainly for the entrainment of air, reduction of water or cement content, plasticization of fresh concrete mixtures, or control of setting time.
Seven types of chemical admixtures are specified in ASTM C 494, and AASHTO M 194, depending on their purpose or purposes in PCC. Air entraining admixtures are specified in ASTM C 260 and AASHTO M 154. General and physical requirements for each type of admixture are included in the specifications.
Advantages
Major increases in strength at early ages without increased cement contents are of particular benefit in precast concrete, allowing earlier stripping times.
Makes possible major reductions in water: cement ratio which allow the production of high strength concrete without excessive cement contents.
Use in production of flowing concrete permits easier construction with quicker placing and compaction and reduced labour costs without increasing water content.
Increased workability levels are maintained for longer than with ordinary sulphonated melamine admixtures.
Improved cohesion and particle dispersion minimizes segregation and bleeding and improves pumpability.
Chloride free, safe for use in prestressed and reinforced concrete.