09-08-2012, 01:30 PM
Automatic Vehicle Location System
Automatic Vehicle Location System.pdf (Size: 273.16 KB / Downloads: 61)
Installation
(1) Unscrew and remove the front cover of device
(2) Insert SIM card by sliding it into the card holder slot, with the chip module facing to the connectors on
PCB, as direction shown in the picture.
(3) Put back the front cover and screw it up.
Be sure to turn off the device before installing the SIM card.
Be sure to deactivate the PIN code, so that the SIM card can operate without PIN protection.
Before installing SIM card, please use a mobile phone to confirm that SIM card can make & receive phone
calls (Can display the caller ID)without problem.
Before installing SIM card, please use a mobile phone to empty the SMS storage of SIM card
Wiring description
The AVL unit should be connected to power source, the wiring work has been completed and checked at
last.
GPS antenna is used to receive satellite signals in the sky. It should be fixed to face the sky; and should
not be covered or shielded by any object containing metal, such as the metallic windshield.
Wiring connections must be firm and reliable; and the joints should be wrapped with insulating tape
tightly.
The unused electrical wire should be properly insulated.