15-10-2016, 11:21 AM
1459168592-asd.pptx (Size: 700.82 KB / Downloads: 5)
Introduction
Bush cutter is a mechanical device which is used to cut the bush. Generally the bush cutter is also known as grass cutter which is nothing used to cut the grass also to cut the bush.
Generally the bush cutter mainly specified as its construction its mainly worked by cutting ability of bush cutter without any arrangement of common grass cutter. The bush cutter is likely to be a great generation of use of grass cutter.
Classification of bush cutter
According to its monoconstruction classified as
manual operate or hand operate
high speed motor revolution
automatic operate with arrangement of speed reduction motor.
Parts of grass cutter
Generally the grass cutter are following parts like,
Frame
Motor
Blade
Handle
Wheel
FRAME
Frame is the most important part of grass cutter .
Its rigid construction with all the body of grass cutter.
It hold all the entire part of the grass cutter.
MOTOR
Motor is the main parts of the grass cutting machine , the motor is specified by the following.
It is a AC motor.
Its around 1 horse power.
Its rotate about 1440 rpm .
The shaft is connect the bush which is rigidly fixed with the blade and its rotate to cut the grass, bush etc.
BLADE
It is used to mainly cutting for grass & bushes.
Its rigidly fixed to the motor shaft which is rotate
Its weighing about 1.2kg.
The material of the blade is hard material to cut the bush, grass which is not able to cutting any equipment
Handle
The handle is to carry the grass cutter machine which is fixed the body of the frame.
Its easy to carry where its requirement .
Generally length of the handle is 3.5 feet.
WHEEL
Generally the four wheel is fixed bottom to the frame body of machine
Wheel is used to travel any area by the help of handle movement.
The wheel is made of a material which is harder than plastic material, so its able to load the machine.