19-07-2014, 12:57 PM
VLSI BASED
ACCIDENT INFORMATION AND CAR SECURITY
SYSTEM
VLSI BASED.pdf (Size: 173.45 KB / Downloads: 33)
Abstract:
VLSI based Accident information and
car security system deals with the concern of
saving the victim , who get trapped in accident
and also about the car security. Accident of
the car is detected using pressor sensors which
are fixed in car. Accident information to the
nearest hospital is carried out with the help of RF
communication. The location of the car is found
using the GPS technique. The security of car is
ensured by using password. The theft information
is sent to the owner’s mobile using GSM module.
The ultimate design of the project is in VLSI.
FPGA is used to interface these modules.
Keywords: Very Large Scale Integration, Global
Positioning System, Global System for Mobile
Communication.
I.INTRODUCTION:
The existing methods of car security
are,Remote starters for car doors, Car with door
lock module facility, Using motion sensors,
Using tilt sensors and etc.,The drawback of these
methods is that they fail to provide almost the
higher security to the car. Similarly there is only
manual information of accident to the hospital.
There is no automatic accident information
system. So our work fulfils these requirements.
Our system uses the FPGA as the basic module
to interface the GPS, GSM, RF modules.c
I.INTRODUCTION:
The existing methods of car security
are,Remote starters for car doors, Car with door
lock module facility, Using motion sensors,
Using tilt sensors and etc.,The drawback of these
methods is that they fail to provide almost the
higher security to the car. Similarly there is only
manual information of accident to the hospital.
There is no automatic accident information
system. So our work fulfils these requirements.
Our system uses the FPGA as the basic module
to interface the GPS, GSM, RF modules.
IX.CONCLUSION
• Thus the accident location will be
detected (using GPS) and will be
communicated to the nearest hospital
(using RF communication).
• Theft information is sent to mobile (using
GSM modem).