23-01-2013, 03:44 PM
Vibro-Compaction
1Vibro-Compaction.docx (Size: 55.25 KB / Downloads: 42)
Abstract
The ground can be improved by adapting certain ground improvement techniques. Vibro-compaction increases the density of the soil by using powerful depth vibrators. Vacuum consolidation is used for improving soft soils by using a vacuum pump. Preloading method is used to remove pore water over time. Heating is used to form a crystalline or glass product by electric current. Ground freezing converts pore water to ice to increase their combined strength and make them impervious. Vibro replacement stone columns improve the bearing capacity of soil whereas Vibro displacement method displaces the soil. Electro osmosis makes water flow through fine grained soils. Electro kinetic stabilization is the application of electro osmosis. Reinforced soil steel is used for retaining structures, sloping walls, dams etc…. seismic loading is suited for construction in seismically active regions. Mechanically stabilized earth structures create a reinforced soil mass. The geo methods like Geosynthesis, Geogrid etc…. are discussed. Soil nailing increases the shear strength of the in-situ soil and restrains its displacement. Micro pile gives the structural support and used for repair/replacement of existing foundations. Grouting is injection of pumpable materials to increase its rigidity. The jet grouting is quite advanced in speed as well as techniques when compared with the general grouting.
Rapid urban and industrial growth demands more land for further development. In order to meet this demand land reclamation and utilization of unsuitable and environmentally affected lands have been taken up. These, hitherto useless lands for construction have been converted to be useful ones by adopting one or more ground improvement techniques. The field of ground improvement techniques has been recognized as an important and rapidly expanding one.
Vibro-Compaction
Vibro-compaction, sometimes referred to as Vibrofloation, is the rearrangement of soil particles into a denser configuration by the use of powerful depth vibration .Vibrocompaction is a ground improvement process for densifying loose sands to create stable foundation soils. The principle behind vibrocompaction is simple. The combined action of vibration and water saturation by jetting rearranges loose sand grains into a more compact state. Vibrocompaction is performed with specially-designed vibrating probes. Both horizontal and vertical modes of vibration have been used in the past. The vibrators used by TerraSystems consist of torpedo-shaped probes 12 to 16 inches in diameter which vibrates at frequencies typically in the range of 30 to 50 Hz. The probe is first inserted into the ground by both jetting and vibration. After the probe reaches the required depth of compaction, granular material, usually sand, is added from the ground surface to fill the void space created by the vibrator. A compacted radial zone of granular material is created
Preloading
Preloading has been used for many years without change in the method or application to improve soil properties. Preloading or pre-compression is the process of placing additional vertical stress on a compressible soil to remove pore water over time. The pore water dissipation reduces the total volume causing settlement.Surcharging is an economical method for ground improvement. However, the consolidation of the soils is time dependent, delaying construction projects making it a non-feasible alternative.