13-09-2013, 02:45 PM
WAVE SHAPING CIRCUITS
Aim:
To design and implement different wave shaping circuits (Differentiator,
Integrator, Clipper and Clamper).
Theory:
(i) Differentiator:
The high pass RC network acts as a differentiator whose output voltage depends
upon the differential of input voltage. Its output voltage of the differentiator can be
expressed as,
(ii) Integrator:
The low pass RC network acts as an integrator whose output voltage depends
upon the integration of input voltage. Its output voltage of the integrator can be
expressed as,
Procedure:
1. Connect the circuit as per the circuit diagram.
2. Set Vin = 5V and f = 1KHz.
3. Observe the Output waveform and plot the graph.
Result:
Thus different wave shaping circuits are studied and their output waveforms are
plotted.