17-12-2012, 05:59 PM
atomics battery
atomics battery.docx (Size: 279.07 KB / Downloads: 25)
INTRODUCTION
A burgeoning need exists today for small, compact, reliable, lightweight and self-contained rugged power supplies to provide electrical power in such applications as electric automobiles, homes, industrial, agricultural, recreational, remote monitoring systems, spacecraft and deep-sea probes. Radar, advanced communication satellites and especially high technology weapon platforms will require much larger power source than today’s power systems can deliver. For the very high power applications, nuclear reactors appear to be the answer. However, for intermediate power range, 10 to 100 kilowatts (kW), the nuclear reactor presents formidable technical problems.
Because of the short and unpredictable lifespan of chemical batteries, however, regular replacements would be required to keep these devices humming. Also, enough chemical fuel to provide 100 kW for any significant period of time would be too heavy and bulky for practical use. Fuel cells and solar cells require little maintenance, and the latter need plenty of sun.
Thus the demand to exploit the radioactive energy has become inevitably high. Several methods have been developed for conversion of radioactive energy released during the decay of natural radioactive elements into electrical energy. A grapefruit-sized radioisotope thermo- electric generator that utilized heat produced from alpha particles emitted as plutonium-238 decay was developed during the early 1950’s.
Since then the nuclear has taken a significant consideration in the energy source of future. Also, with the advancement of the technology the requirement for the lasting energy sources has been increased to a great extent. The solution to the long term energy source is, of course, the nuclear batteries with a life span measured in decades and has the potential to be nearly 200 times more efficient than the currently used ordinary batteries. These incredibly long-lasting batteries are still in the theoretical and developmental stage of existence, but they promise to provide clean, safe, almost endless energy.
HISTORICAL DEVELOPMENTS
The idea of nuclear battery was introduced in the beginning of 1950, and was patented on March 3rd, 1959 to tracer lab. Even though the idea was given more than 30 years before, no significant progress was made on the subject because the yield was very less.
A radio isotope electric power system developed by inventor Paul Brown was a scientific break through in nuclear power. Brown’s first prototype power cell produced 100,000 times as much energy per gram of strontium -90(the energy source) than the most powerful thermal battery yet in existence. The magnetic energy emitted by the alpha and beta particles inherent in nuclear material. Alpha and beta particles are produced by the radio active decay of certain naturally occurring and man –made nuclear material (radio nuclides). The electric charges of the alpha and beta particles have been captured and converted to electricity for existing nuclear batteries, but the amount of power generated from such batteries has been very small.
Alpha and beta particles also posses kinetic energy, by successive collisions of the particles with air molecules or other molecules. The bulk of the R &D of nuclear batteries in the past has been concerned with this heat energy which is readily observable and measurable. The magnetic energy given off by alpha and beta particles is several orders of magnitude grater than the kinetic energy or the direct electric energy produced by these same particles. However, the myriads of tiny magnetic fields existing at any time cannot be individually recognized or measured. This energy is not captured locally in nature to produce heat or mechanical effects, but instead the energy escapes undetected.
ENERGY PRODUCTION MECHANISM
Betavoltaics
Betavoltacis is an alternative energy technology that promises vastly extended battery life and power density over current technologies. Betavoltaics are generators of electrical current, ineffect a form of a battery, which use energy from a radioactive source emitting beta particles (electrons). The functioning of a betavoltaics device is somewhat similar to a solar panel, which converts photons (light) into electric current.
Betavoltaic technique uses a silicon wafer to capture electrons emitted by a radioactive gas, such as tritium. It is similar to the mechanics of converting sunlight into electricity in a solar panel. The flat silicon wafer is coated with a diode material to create a potential barrier. The radition absorbed in the vicinity of and potiential barrier like a p-n junction or a metal-semiconductor contact would generate separate electron-hole pairs which inturn flow in an electric circuit due to the voltaic effect. Of course, this occurs to a varying degree in different materials and geometries.