Many researchers have studied the properties of ordinary Portland cement concrete using minerals such as fly ash, silica ash from micro silica, GGBS as cement replacement materials. A few researchers have done work on mixed triple concrete using mineral additives such as micro silica, fly ash. Mineral additives are used to increase strength and improve the durability of concrete. Blast furnace slag, fly ash and micro silica are some of the mineral mixtures used in varying proportions to achieve such results. Mineral mixtures also affect the properties of the concrete in the fresh state, the rate of development of the strength and the durability in the hardened state. Economics and environmental considerations are key factors in the growth of the use of mineral additives. Micro silica along with super plasticizer is usually used in concrete to increase strength and durability. Due to its finer size and its higher pozzolanity compared to other mineral additives, the incorporation of micro silica leads to better mechanical properties of concrete even at an early age. Wheat ash, on the other hand, as a mineral blend in concrete, increases its workability, long-term strength and durability. It is generally believed that high strength concretes are achievable only through the addition of micro silica. However, micro silica is relatively expensive compared to cement, especially in countries like India where it is imported. Fly ash in another hand is readily available at a lower cost than cement. In addition, micro silica due to its fine particle size increases water demand and tends to consume a higher dose of superplasticizer, while fly ash due to the presence of spherical particles that easily overturn each other by reducing the friction of Internal particle Improvement of working capacity and reduction of water demand. Due to the associated environmental contamination caused in the production of the reserve of virgin raw material used in the manufacture of cement for future generations and at the same time due to the availability of additional foundations such as fly ash, micro silica, etc. The mechanical strength properties of ternary mixed concrete for various w / b ratios of 0.55, 0.45 and 0.35 for 28, 90 and 180 days.