I am Amritha, I want to take a seminar on soil stabilisation using raw plastic bottles. I need various method (plate load test) on which the study was conducted. I also need diagrams related to this topics.
The use of plastic products such as plastic bags, bottles, containers and packaging tapes etc. is increasing day by day. As a result, the amount of plastic waste. This will lead to various environmental problems. Much of waste produced in the environment for many years, leading to various environmental issues. Therefore, it is necessary that the waste can be used effectively with the technical development in every area. Many products are made with plastic waste. This paper presents the details of several researchers on the possible use of plastic waste for soil stabilization studies conducted. The results of the study show that the addition of plastic strips on the floor; Increased shear strength, tensile strength and California Bearing Ratio (CBR) of the soil.Soil stabilization is any process that so improves the physical properties of the soil, such as increased shear strength, resilience, can be made suitable materials of cement, lime and fly ash as controlled waste, phosphogypsum, etc. by compression or the use of additives costs for the introduction of these additives has increased in recent years opened the door wide for the development of other types of soil additives, such as plastic, bamboo, etc. effectively used this new technique of soil stabilization to meet the challenges of society, to the waste, not to reduce the production of valuable materials from waste makes sense. The use of plastic products such as plastic bags, bottles, etc. is increasing day by day leads to several environmental problems. Therefore disposal of plastic waste without environmental hazards has become a real challenge. Therefore, the use of plastic bottles is as a soil stabilizer is a useful, since there is no shortage of good quality soil for embankments. This project involves the detailed study of the possible use of plastic bottles waste for soil stabilization. The analysis has been filled by testing the cargo floor panels with layers of plastic bottles with sand and halved bottle in the middle and a third tank positions arranged reinforced executed. Comparing the test results showed that the cut centrally positioned bottles were most effective in increasing the strength of the soil. The optimum proportion of the plastic strip on the bottom was found by California Bearing Ratio test and use this percentage of plastic, plate load test was also performed. The size and content of the shredded waste plastic bottles have a significant impact on the improvement of the soil strength.