In small-scale industries and car maintenance shops, there are frequent needs to tighten and loosen in screws, grinding, drilling, grinding machine. Huge and complicated designed parts can not be machined in the ordinary machine. In addition, a separate machine is required for each operation. The required initial cost increase, large area requirements and a large number of machines are required. In a single machine, the entire operation specified above can be carried out, ie after grinding, the drill head can be removed from the barrel wrench and the necessary tools such as grinding wheels, drilling tools, etc. Accomplished. By applying tires, the pneumatic cylinder with piston that works with an air compressor will give the successive action to operate this machine. With this we can achieve our industrial requirements.