23-06-2014, 01:55 PM
AMAN H. RANA
[attachment=65208]
JOB OBJECTIVE
In leading technology oriented organization where interpersonal skills would be needed and where Customer satisfaction is the ultimate goal. To obtain a challenge in an organization where my knowledge and skills can be shared enriched and put forward for the further development.
AMBITION
To reach the pinnacle of success in career & life through hard work and integrity.
ENGINEER – Diploma Mechanical Engineer
JOB PROFILE
Supervising subordinate smoothly and efficiently.
Preparing preventive maintenance check- list, execution of planned preventive maintenance check list and breakdown to overcome breakdowns and to minimize the idle time of the machineries.
Manpower Handling.
Production Planning & control.
Paper work easily to done.
Receproeting Compressor & caterpillar engine work at terminattor plant.
Prepare Binder batch According to Daily consumption by correct Dilution.
Maintain Resin ,Ammonioum sulfate & saline stock.
Maintain Region tempreture.
Skillful in different national and international code such as ASTM ( American Society for Testing Materials),EN(European Norms), IS(Indian Standards), and API(American Petroleum Industries).
Developing QAP for procurement of new equipment such as heat exchanger, vessels, tanks and piping, conducting welder test, making PQR, WPS, and WPA, maintaining quality of fabrication job in site according to code & standards.
Responsibility of Testing of material likes destructive & non- destructive before & after Heat-
Treatment Processes like Normalizing, Quenching & tempering.
Lab Tests – Re-Identification of test specimens in laboratory & witnessing of mechanical metallurgical testing (Yield test, Tensile test, %EL, Bend test, Impact test) & spectro-analysis
EDUCATION
Specialization : Diploma Mechanical engineer.
Institute/University : Gujarat Technological University.
Year of passing : 2011 (D.M.E.)
College Name : V.B.T.P.Umarakh, Bardoli.
Year of passing in school : 2008(10th PASS in G.S.E.B. BOARD 72.3%)
DIPLOMA GRADE
ACPC CPI: -
(DISTINTION 7.9CPI OR 79%)
WORK EXPERIANCE
I have worked at M/s Princeplastics.co. at Reliance Hahira Site.
My Work there was to Replace the PV( PRESSURE VALVE ) , SRV( SAFETY RETURN VALVE) ,
NRV (NON RETURN VALVE) & Jointing of HDP Pipe & check in leakage of the Chemical in
Mirroring joint in Heater.
I have worked on Reciprocating compressor & caterpillar engine in Terminator Plant & have worked on epoxy - coating in pressure vessel & FRP Coating in pressure valve ( Material used:- Hardner-401 , Rasin-2960 & To change in spark plug , transformer ( 2l , 4l -4w2256 ) , oil,nalco Lubrication In loop tank , crankcase etc. In all kind of break down, preventive maintenance In caterpillar engine.(AUG,2O11 TO MARCH ,2012. )
instrument:-PRESURE GUAGE , PRASSURE TRANSMETER , TOTAL TRANSMETER
GAS DECACTOR , TEMPREATURE GAUGE , LEAK SURVAYER , VIBRATION
METER. (Suction pressure:-30bar, Discharge pressure:-48 bar)
FAULT:- HIGH VOLTAGE , LOW VOLTAGE,3RD STAGE PREESURE HIGH,HIGH CURRENT.
DESIGNATION: - As a supervisor.
I worked at Rockxul Rockwool Insulation pvt. Limited. , dahej.
Handling of man power , paper work , handling of m/c , wiremax change in
Hydraulic lifting, stitching m/c maintenance, Binder tank in chemical process ,
Check the reading , scrap material into silo for recycling process. All kind of
Process is sensor & conveyer Automation.
Can Work independently as well as in team. I have good ability to this Work.
DESIGNATION:-Production Officer. ( APRIL 2012 TO APRIL 2013)
PERSONAL PARTICULAR
Address : A-31;Puspanagar sco.;Bhathena-2;Udhana, Surat.
Pin – 394210.
Date of Birth : 16/09/1992
Nationality : Indian
Gender : Male
Marital Status : Unmarried , Single.
Language : Gujarati , Hindi , English.
[attachment=65208]
JOB OBJECTIVE
In leading technology oriented organization where interpersonal skills would be needed and where Customer satisfaction is the ultimate goal. To obtain a challenge in an organization where my knowledge and skills can be shared enriched and put forward for the further development.
AMBITION
To reach the pinnacle of success in career & life through hard work and integrity.
ENGINEER – Diploma Mechanical Engineer
JOB PROFILE
Supervising subordinate smoothly and efficiently.
Preparing preventive maintenance check- list, execution of planned preventive maintenance check list and breakdown to overcome breakdowns and to minimize the idle time of the machineries.
Manpower Handling.
Production Planning & control.
Paper work easily to done.
Receproeting Compressor & caterpillar engine work at terminattor plant.
Prepare Binder batch According to Daily consumption by correct Dilution.
Maintain Resin ,Ammonioum sulfate & saline stock.
Maintain Region tempreture.
Skillful in different national and international code such as ASTM ( American Society for Testing Materials),EN(European Norms), IS(Indian Standards), and API(American Petroleum Industries).
Developing QAP for procurement of new equipment such as heat exchanger, vessels, tanks and piping, conducting welder test, making PQR, WPS, and WPA, maintaining quality of fabrication job in site according to code & standards.
Responsibility of Testing of material likes destructive & non- destructive before & after Heat-
Treatment Processes like Normalizing, Quenching & tempering.
Lab Tests – Re-Identification of test specimens in laboratory & witnessing of mechanical metallurgical testing (Yield test, Tensile test, %EL, Bend test, Impact test) & spectro-analysis
EDUCATION
Specialization : Diploma Mechanical engineer.
Institute/University : Gujarat Technological University.
Year of passing : 2011 (D.M.E.)
College Name : V.B.T.P.Umarakh, Bardoli.
Year of passing in school : 2008(10th PASS in G.S.E.B. BOARD 72.3%)
DIPLOMA GRADE
ACPC CPI: -
(DISTINTION 7.9CPI OR 79%)
WORK EXPERIANCE
I have worked at M/s Princeplastics.co. at Reliance Hahira Site.
My Work there was to Replace the PV( PRESSURE VALVE ) , SRV( SAFETY RETURN VALVE) ,
NRV (NON RETURN VALVE) & Jointing of HDP Pipe & check in leakage of the Chemical in
Mirroring joint in Heater.
I have worked on Reciprocating compressor & caterpillar engine in Terminator Plant & have worked on epoxy - coating in pressure vessel & FRP Coating in pressure valve ( Material used:- Hardner-401 , Rasin-2960 & To change in spark plug , transformer ( 2l , 4l -4w2256 ) , oil,nalco Lubrication In loop tank , crankcase etc. In all kind of break down, preventive maintenance In caterpillar engine.(AUG,2O11 TO MARCH ,2012. )
instrument:-PRESURE GUAGE , PRASSURE TRANSMETER , TOTAL TRANSMETER
GAS DECACTOR , TEMPREATURE GAUGE , LEAK SURVAYER , VIBRATION
METER. (Suction pressure:-30bar, Discharge pressure:-48 bar)
FAULT:- HIGH VOLTAGE , LOW VOLTAGE,3RD STAGE PREESURE HIGH,HIGH CURRENT.
DESIGNATION: - As a supervisor.
I worked at Rockxul Rockwool Insulation pvt. Limited. , dahej.
Handling of man power , paper work , handling of m/c , wiremax change in
Hydraulic lifting, stitching m/c maintenance, Binder tank in chemical process ,
Check the reading , scrap material into silo for recycling process. All kind of
Process is sensor & conveyer Automation.
Can Work independently as well as in team. I have good ability to this Work.
DESIGNATION:-Production Officer. ( APRIL 2012 TO APRIL 2013)
PERSONAL PARTICULAR
Address : A-31;Puspanagar sco.;Bhathena-2;Udhana, Surat.
Pin – 394210.
Date of Birth : 16/09/1992
Nationality : Indian
Gender : Male
Marital Status : Unmarried , Single.
Language : Gujarati , Hindi , English.