17-07-2014, 12:55 PM
SUMMER TRAINING AT IL,KOTA
[attachment=65923]
ABOUT IL
Instrumentation Limited ( IL) is a Government Of India Enterprise established in 1964.
IL has its registered and corporate office at Kota in state of Rajasthan. Manufacturing facilities are based at Kota and Palakkad in Kerala State.
Today IL is manufacturing and supplying state of the art control equipment on turnkey basis to various sector of Industry .
IL’s manufacturing facilities are accredited with ISO 9001:2008 certification
Vision
To become a leading world class Engineering Organization focused on customer satisfaction in the field of Control Instrumentation; Automation for Core Sector viz. Power, Steel, Refineries & other Process Industries; Telecommunication; Railway Signalling, Industrial UPS etc...
M.O.U
(A).Collaboration agreement between IL and Duon system Co. Ltd. , Seoul, Korea for Smart transmitters.
(B). MOU between IL and Emerson for DCS system.
©.MOU between IL and Hollysys.
(D). MOU between IL and CDOT for HVP and ROI.
(E).MOU between IL and Toshiba for DCS systems and other products
Surface Mount Technique
It is an Electronics Assembly Technique where Electronic components are mounted to the surface of printed circuit board without holes drilled through the board for insertion of components leads
BENEFITS OF SMT
Reduction in weight , mobile and handhold electronics items such as video cameras and cell phones are example , which have low weight and high performance
A higher operating speed due to shorter interconnects
Reduction in package size results in greater functionality in the same board area.
Reduction in noise , this is due to small electrical paths compared to leaded component
Pick and mount machine
It picks up small component With the help of programming we put in the computer and mount on the PCB . This machine mount small Component on the PCB at first after this we solder the PCB.
After soldering the PCB component we take out the card and test it .When any component short we check it manually and remove difficulties and further test it properly.
Soldering Machine
It is a big machining in which we insert the card and there is a sensor .
We pass the card on the heating plate .
This plate is divided in to three parts first part is low heated , second one is higher heated and third one is very higher heated .
After this card and heating plate distance is large ,after this we pass the card on the melt liquid of Ag + Sn + Pb .
Then card is solder by the liquid.Temp 2400C and we soldered 10 cards at a time and card soldering time is one second.
TELECOM TECHNOLOGY
This field of telecommunication has evolved from the stage when signs,drum beats and semaphores were used for long distance communication to a stage when electrical,radio and electro-optical signals are used.
Early switching systems were manual and operator oriented.
Limitations of Operator switching systems were quickly recognized and automatic exchanges came into existence.
Automatic switching can be classified as electromechanical and electronic.
Electromechanical systems are better known as Strowger switching systems.
Automatic Exchange vs Manual Exchange
In a manual exchange the subscriber needs to communicate with the operator while On the other hand,the operation of an automatic exchange is language independent
A greater degree of privacy is obtained in automatic exchanges,as no operator is normally involved in setting up and monitoring a call.
Establishment and release of calls are faster in automatic exchanges as compare to manual exchange.
In a automatic exchange ,the time required to establish and release a call remains more or less of the same order irrespective of the load on the system or the time of the day while In a manual switching system,this may not be true
UPS ENGINEERING
An uninterruptible power supply, also uninterruptible power source, UPS or battery/flywheel backup, is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails.
[attachment=65923]
ABOUT IL
Instrumentation Limited ( IL) is a Government Of India Enterprise established in 1964.
IL has its registered and corporate office at Kota in state of Rajasthan. Manufacturing facilities are based at Kota and Palakkad in Kerala State.
Today IL is manufacturing and supplying state of the art control equipment on turnkey basis to various sector of Industry .
IL’s manufacturing facilities are accredited with ISO 9001:2008 certification
Vision
To become a leading world class Engineering Organization focused on customer satisfaction in the field of Control Instrumentation; Automation for Core Sector viz. Power, Steel, Refineries & other Process Industries; Telecommunication; Railway Signalling, Industrial UPS etc...
M.O.U
(A).Collaboration agreement between IL and Duon system Co. Ltd. , Seoul, Korea for Smart transmitters.
(B). MOU between IL and Emerson for DCS system.
©.MOU between IL and Hollysys.
(D). MOU between IL and CDOT for HVP and ROI.
(E).MOU between IL and Toshiba for DCS systems and other products
Surface Mount Technique
It is an Electronics Assembly Technique where Electronic components are mounted to the surface of printed circuit board without holes drilled through the board for insertion of components leads
BENEFITS OF SMT
Reduction in weight , mobile and handhold electronics items such as video cameras and cell phones are example , which have low weight and high performance
A higher operating speed due to shorter interconnects
Reduction in package size results in greater functionality in the same board area.
Reduction in noise , this is due to small electrical paths compared to leaded component
Pick and mount machine
It picks up small component With the help of programming we put in the computer and mount on the PCB . This machine mount small Component on the PCB at first after this we solder the PCB.
After soldering the PCB component we take out the card and test it .When any component short we check it manually and remove difficulties and further test it properly.
Soldering Machine
It is a big machining in which we insert the card and there is a sensor .
We pass the card on the heating plate .
This plate is divided in to three parts first part is low heated , second one is higher heated and third one is very higher heated .
After this card and heating plate distance is large ,after this we pass the card on the melt liquid of Ag + Sn + Pb .
Then card is solder by the liquid.Temp 2400C and we soldered 10 cards at a time and card soldering time is one second.
TELECOM TECHNOLOGY
This field of telecommunication has evolved from the stage when signs,drum beats and semaphores were used for long distance communication to a stage when electrical,radio and electro-optical signals are used.
Early switching systems were manual and operator oriented.
Limitations of Operator switching systems were quickly recognized and automatic exchanges came into existence.
Automatic switching can be classified as electromechanical and electronic.
Electromechanical systems are better known as Strowger switching systems.
Automatic Exchange vs Manual Exchange
In a manual exchange the subscriber needs to communicate with the operator while On the other hand,the operation of an automatic exchange is language independent
A greater degree of privacy is obtained in automatic exchanges,as no operator is normally involved in setting up and monitoring a call.
Establishment and release of calls are faster in automatic exchanges as compare to manual exchange.
In a automatic exchange ,the time required to establish and release a call remains more or less of the same order irrespective of the load on the system or the time of the day while In a manual switching system,this may not be true
UPS ENGINEERING
An uninterruptible power supply, also uninterruptible power source, UPS or battery/flywheel backup, is an electrical apparatus that provides emergency power to a load when the input power source, typically mains power, fails.