31-07-2014, 12:45 PM
JIGNESH R TAILOR RESUME
[attachment=66420]
PROFESSIONAL SUMMARY:
• Expertise in PDS Piping Design and equipment Modeling.
• Good knowledge of Frame works & Micro station work.
• Good Knowledge in Auto-Cad for 2D & 3D drawings.
• Excellent interpersonal skills, ability to lead and work in team.
SOFTWARE EXPERTISE:
• PDS (Plant Design System) 2009 V-10.0 [Piping, Equipment and Frame Work Modeling]
• Micro Station,
• NavisWorks, Smart Plant Review (SPR) and PDS related all Software.
• AutoCAD 2010
• MS Office.
WORK EXPERIENCE: (8 years +)
1) AEGIS LIMITED (ESSAR ENGINEERING SERVICES DIVISION) HAZIRA, SURAT.
DESIGNATION: DRAUGHTSMAN MECHANICAL
(September - 2010 - Continue)
It is Engineering Consultancy Company of Essar having proficiency in Steel, Power, Hydro-carbon, Shipping, Ports, Railway, and Fertilizer etc.
RESPONSIBILITES:
Jurong Aromatics Corporation Pte. Ltd. Singapore.
• Making 2D drawings like P&IDs, Isometric, Equipment GA, Plot Plan Drawings, Piping GA Drawings in AutoCAD.
• Piping routing from P&ID & GA using PDS software like pump house piping, heat exchanger piping, tank to pump piping, water piping, steam piping, drain & vent piping etc.
• Equipment modeling for tank, pump, column, heat exchanger, oil skid, ducting, chimney etc.
• All piping support marking in PDS as per piping requirement.
• Reviewing the Model on regular basis, performing the clash Check in PDS & resolving the issues as per the best possible solution.
• Extracting the Isometrics drawings in Micro Station format & editing them as per the requirement.
• All types of Tray, Conduit and U/G Trench Routing in PDS as per GA & Plant Layout Drawings.
• Preparation of line diagrams, lighting layout drawings, earthing layout drawings & block diagrams etc.
2X135MW Multi Fuel Fired Power Plant (BTG area), Essar power, Hazira. INDIA
• Power Plant all critical pipe routing & modeling like Main Steam, HRH, CRH, condensate, Lube Oil, feed water etc. based upon P&ID, Equipment GA & stress analysis. Actively involved in Pipe routing for all major lines & finding the best possible route in PDS.
• Equipment Modeling for Turbine building including Steam Turbine Generator & all other major turbine auxiliaries.
1016 Essar Steel Plant, Minnesota, USA
• All kind of pipe routing & modeling in PDS for steel plant like steam, Gas, compressed air, instrument air, slurry, fire water, raw water, soft water, process water, cooling water, glycol and seal water etc.
• Equipment modeling for all major equipment in steel plant like balling, bunker house, pump, heat exchanger, fin fan cooler and tank etc.
• All types of Structural Frame Work Modeling in PDS like slurry tank platform, junction house, bunker house and staircase etc.
• All types of Tray, Conduit and U/G Trench Routing in PDS as per GA & Plant Layout Drawings.
Besides all the above projects, I have developed the CAD working Standards for all mechanical drawing. It includes the layering, colors, text Sizing etc. for P&IDs, Isometrics and GA Drawings etc.
2) Organization : LARSEN & TOUBRO LIMITED
Industry : Ship Design
Designation : Draftsman Mechanical
Date of Employment : July 2008 to Aug-2010.
RESPONSIBILITIES
Equipment Modeling in Tribon
To create the drawings of Hull Outfitting
To create the Nesting Plan
To Create the Drawings of Structural Foundation
To solve the problem related to CNC plate cutting Machine
3) ESSAR STEEL LIMITED
Designation : Maintenance Department
Date of Employment : Nov-2006 to June-2008
RESPONSIBILITIES:
To look after the problem of rotating equipment running and solve them at site.
Preventive Maintenance, Shut down maintenance, Break down Maintenance
4) RELIANCE INDUSTRIES LIMITED
Organization : RELIANCE INDUSTRIES LIMITED
Industry : Chemical Plant
Designation : Apprenticeship Technician
Date of Employment : Oct-2005 to Oct-2006
RESPONSIBILITES:
I was looking after the Preventive Maintenance, Shutdown Maintenance, Break down Maintenance.
Solve the problem of running Plants.
To look after the alignment, run-our checking of Pumps, Blowers, Lobe Blower, etc.
RESPONSIBILITES:
• Preparation of General Assembly Drawings for Textile Machinery.
• Preparation of Detail Drawings of Part Assembly & Parts along with BOM including Fabrication and Machining Details.
• EDUCATION QUALIFICATION:
EXAMINATION GRADE YEAR INSTITUTE UNIVERISTY/BOARD
PDS Designer
(Plant Design System) I have been Trained in PDS (3D Modeling Software) Piping, Equipment, Frame work and Race Way Modeling at Essar Engineering Services Division, Hazira, Surat.
I.T.I. Trade MMCP First Class 2005 Bhatpore, Hazira Technical Examination Board N.C.V.T.
AutoCAD A Grade 2004 SMART CAD SURAT.
S.S.C Second Class 2003 L.N.B.DALYA HIGH SCHOOL Gujarat Secondary Education Board. Gandhinagar.
PERSONAL DETAILS:
Correspondence Address : Adajan Gam opp,sai krupa app.
Dist.-Surat, Gujarat INDIA
Contact No. : +91 9925824660
E-mail : jigneshrtailor[at]yahoo.com Date of Birth : 21st Oct 1985
Marital Status : Married
Religion : Hindu
Nationality : Indian
Languages Known : English, Hindi & Gujarati
I declared that above mentioned information is true and I am fully responsible for the same
[attachment=66420]
PROFESSIONAL SUMMARY:
• Expertise in PDS Piping Design and equipment Modeling.
• Good knowledge of Frame works & Micro station work.
• Good Knowledge in Auto-Cad for 2D & 3D drawings.
• Excellent interpersonal skills, ability to lead and work in team.
SOFTWARE EXPERTISE:
• PDS (Plant Design System) 2009 V-10.0 [Piping, Equipment and Frame Work Modeling]
• Micro Station,
• NavisWorks, Smart Plant Review (SPR) and PDS related all Software.
• AutoCAD 2010
• MS Office.
WORK EXPERIENCE: (8 years +)
1) AEGIS LIMITED (ESSAR ENGINEERING SERVICES DIVISION) HAZIRA, SURAT.
DESIGNATION: DRAUGHTSMAN MECHANICAL
(September - 2010 - Continue)
It is Engineering Consultancy Company of Essar having proficiency in Steel, Power, Hydro-carbon, Shipping, Ports, Railway, and Fertilizer etc.
RESPONSIBILITES:
Jurong Aromatics Corporation Pte. Ltd. Singapore.
• Making 2D drawings like P&IDs, Isometric, Equipment GA, Plot Plan Drawings, Piping GA Drawings in AutoCAD.
• Piping routing from P&ID & GA using PDS software like pump house piping, heat exchanger piping, tank to pump piping, water piping, steam piping, drain & vent piping etc.
• Equipment modeling for tank, pump, column, heat exchanger, oil skid, ducting, chimney etc.
• All piping support marking in PDS as per piping requirement.
• Reviewing the Model on regular basis, performing the clash Check in PDS & resolving the issues as per the best possible solution.
• Extracting the Isometrics drawings in Micro Station format & editing them as per the requirement.
• All types of Tray, Conduit and U/G Trench Routing in PDS as per GA & Plant Layout Drawings.
• Preparation of line diagrams, lighting layout drawings, earthing layout drawings & block diagrams etc.
2X135MW Multi Fuel Fired Power Plant (BTG area), Essar power, Hazira. INDIA
• Power Plant all critical pipe routing & modeling like Main Steam, HRH, CRH, condensate, Lube Oil, feed water etc. based upon P&ID, Equipment GA & stress analysis. Actively involved in Pipe routing for all major lines & finding the best possible route in PDS.
• Equipment Modeling for Turbine building including Steam Turbine Generator & all other major turbine auxiliaries.
1016 Essar Steel Plant, Minnesota, USA
• All kind of pipe routing & modeling in PDS for steel plant like steam, Gas, compressed air, instrument air, slurry, fire water, raw water, soft water, process water, cooling water, glycol and seal water etc.
• Equipment modeling for all major equipment in steel plant like balling, bunker house, pump, heat exchanger, fin fan cooler and tank etc.
• All types of Structural Frame Work Modeling in PDS like slurry tank platform, junction house, bunker house and staircase etc.
• All types of Tray, Conduit and U/G Trench Routing in PDS as per GA & Plant Layout Drawings.
Besides all the above projects, I have developed the CAD working Standards for all mechanical drawing. It includes the layering, colors, text Sizing etc. for P&IDs, Isometrics and GA Drawings etc.
2) Organization : LARSEN & TOUBRO LIMITED
Industry : Ship Design
Designation : Draftsman Mechanical
Date of Employment : July 2008 to Aug-2010.
RESPONSIBILITIES
Equipment Modeling in Tribon
To create the drawings of Hull Outfitting
To create the Nesting Plan
To Create the Drawings of Structural Foundation
To solve the problem related to CNC plate cutting Machine
3) ESSAR STEEL LIMITED
Designation : Maintenance Department
Date of Employment : Nov-2006 to June-2008
RESPONSIBILITIES:
To look after the problem of rotating equipment running and solve them at site.
Preventive Maintenance, Shut down maintenance, Break down Maintenance
4) RELIANCE INDUSTRIES LIMITED
Organization : RELIANCE INDUSTRIES LIMITED
Industry : Chemical Plant
Designation : Apprenticeship Technician
Date of Employment : Oct-2005 to Oct-2006
RESPONSIBILITES:
I was looking after the Preventive Maintenance, Shutdown Maintenance, Break down Maintenance.
Solve the problem of running Plants.
To look after the alignment, run-our checking of Pumps, Blowers, Lobe Blower, etc.
RESPONSIBILITES:
• Preparation of General Assembly Drawings for Textile Machinery.
• Preparation of Detail Drawings of Part Assembly & Parts along with BOM including Fabrication and Machining Details.
• EDUCATION QUALIFICATION:
EXAMINATION GRADE YEAR INSTITUTE UNIVERISTY/BOARD
PDS Designer
(Plant Design System) I have been Trained in PDS (3D Modeling Software) Piping, Equipment, Frame work and Race Way Modeling at Essar Engineering Services Division, Hazira, Surat.
I.T.I. Trade MMCP First Class 2005 Bhatpore, Hazira Technical Examination Board N.C.V.T.
AutoCAD A Grade 2004 SMART CAD SURAT.
S.S.C Second Class 2003 L.N.B.DALYA HIGH SCHOOL Gujarat Secondary Education Board. Gandhinagar.
PERSONAL DETAILS:
Correspondence Address : Adajan Gam opp,sai krupa app.
Dist.-Surat, Gujarat INDIA
Contact No. : +91 9925824660
E-mail : jigneshrtailor[at]yahoo.com Date of Birth : 21st Oct 1985
Marital Status : Married
Religion : Hindu
Nationality : Indian
Languages Known : English, Hindi & Gujarati
I declared that above mentioned information is true and I am fully responsible for the same