29-08-2014, 10:13 AM
Wet mat opener / Blow dryer
[attachment=67280]
Wet mat opener / Blow dryer
For preparation of open and uniform fleece for dryer
Features
• Easy installation and operation
• Equal distribution of wet ends
• Pre-drying effect by transport air
• Flexible connection of lines
• Low maintenance effort
In detail
The new system was developed to simplify the wet opening step and provide a number of advantages to the production.
The fiber is collected after the mat opener (1) at the end of after treatment and transported by means of a fan (2) to an air separator (3) which is located on top of the feeder unit. A certain fiber level is maintained there and fiber is fed continuously to the opening unit which consists of feed rollers (4) and an opening tambour (5). The opened fiber is provided as a uniform fleece directly to the dryer belt.
For production this system provides the advantage of equal distribution of the fiber mat over the working width thus reducing wet spots. The dryer capacity is also supported by a certain pre-drying through transport air, this can be further increased by using hot air for fiber transport Further the system can be used as an interlink to shift production from one line to another one. For maintenance the system is much simpler and requires less effort than conventional systems with spiked aprons
[attachment=67280]
Wet mat opener / Blow dryer
For preparation of open and uniform fleece for dryer
Features
• Easy installation and operation
• Equal distribution of wet ends
• Pre-drying effect by transport air
• Flexible connection of lines
• Low maintenance effort
In detail
The new system was developed to simplify the wet opening step and provide a number of advantages to the production.
The fiber is collected after the mat opener (1) at the end of after treatment and transported by means of a fan (2) to an air separator (3) which is located on top of the feeder unit. A certain fiber level is maintained there and fiber is fed continuously to the opening unit which consists of feed rollers (4) and an opening tambour (5). The opened fiber is provided as a uniform fleece directly to the dryer belt.
For production this system provides the advantage of equal distribution of the fiber mat over the working width thus reducing wet spots. The dryer capacity is also supported by a certain pre-drying through transport air, this can be further increased by using hot air for fiber transport Further the system can be used as an interlink to shift production from one line to another one. For maintenance the system is much simpler and requires less effort than conventional systems with spiked aprons