30-08-2014, 04:15 PM
AUTOMATIC PNEUMATIC JACK
[attachment=67486]
ABSTRACT
This project work titled “AUTOMATIC PNEUMATIC JACK FOR LIGHT VEHICLE” has been conceived having studied the difficulty in lifting the any type of light vehicles. Our survey in the regard in several automobile garages, revealed the facts that mostly some difficult methods were adopted in lifting the vehicles for reconditioning.
Now the project has mainly concentrated on this difficulty, and hence a suitable arrangement has been designed. Such that the vehicles can be lifted from the floor land without application of any impact force. By pressing the button, the solenoid valve activated. The compressed air is goes to the pneumatic cylinder through solenoid valve. The ram of the pneumatic cylinder is act as a jack. The automobile engine drive is coupled to the compressor engine, so that it stores the compressed air when the vehicle running. This compressed air is used to activate the pneumatic cylinder, when the button is activated.
INTRODUCTION
This device the automatic pneumatic jack for light vehicle garages has been developed to later the needs of small and medium automobile garages. In most of the garages the vehicles are lifted by using screw jack. This needs high man power and skilled labors. In order to avoid all such disadvantages, this automatic pneumatic Jack has been designed in such a way that it can be used to lift the vehicle very smoothly without any impact force. The operation is made be simple that even any person can handled, by just pressing the button.
[attachment=67486]
ABSTRACT
This project work titled “AUTOMATIC PNEUMATIC JACK FOR LIGHT VEHICLE” has been conceived having studied the difficulty in lifting the any type of light vehicles. Our survey in the regard in several automobile garages, revealed the facts that mostly some difficult methods were adopted in lifting the vehicles for reconditioning.
Now the project has mainly concentrated on this difficulty, and hence a suitable arrangement has been designed. Such that the vehicles can be lifted from the floor land without application of any impact force. By pressing the button, the solenoid valve activated. The compressed air is goes to the pneumatic cylinder through solenoid valve. The ram of the pneumatic cylinder is act as a jack. The automobile engine drive is coupled to the compressor engine, so that it stores the compressed air when the vehicle running. This compressed air is used to activate the pneumatic cylinder, when the button is activated.
INTRODUCTION
This device the automatic pneumatic jack for light vehicle garages has been developed to later the needs of small and medium automobile garages. In most of the garages the vehicles are lifted by using screw jack. This needs high man power and skilled labors. In order to avoid all such disadvantages, this automatic pneumatic Jack has been designed in such a way that it can be used to lift the vehicle very smoothly without any impact force. The operation is made be simple that even any person can handled, by just pressing the button.