01-09-2014, 03:21 PM
Multi-Level Security for Automotive
[attachment=67516]
Abstract:
Security has become a prominent parameter for all the electronic gadgets. This proposed paper aims at securing the automotive and also preventing the unauthorized persons from accessing it. The technologies such as Radio Frequency Identification (RFID), thumb registration system and face recognition will be applied for the security measures. This proposed system will also be implemented in LabVIEW using Educational Laboratory Virtual Instrumentation Suite II (ELVIS). Initially, the RFID system will be authenticated .The importance of this system is that, it gets verification from the Road Transportation Office (RTO).The user will require an authentication to get proceed to the thumb registration module by which the efficiency of the thumb is enhanced using Pattern Matching Algorithm (PMA). Face recognition system is a technique which will be used after the thumb registration system. At last, this system allows the user to drive the car. For emergency, a key insertion slot will be placed in the system through which the user can insert the key. During this emergency mode of operation the camera captures the driver’s image and sends it to the owner’s mobile as Multimedia Messaging Service (MMS). The owner will provide the authentication password; this in turn allows the user to drive the vehicle. Global System for Mobile communication (GSM) module is also kept inbuilt for tracking purpose. Among the different technologies proposed, RFID technique is briefly discussed in this paper.
Introduction:
Recent surveys conducted by United States of America (USA) reported, about 625 vehicles are stolen in an average for a day .The present security system lacks in providing the tighten security to the automotive. The ultimate aim of this paper is to provide a hi-tech security to the automotive .The existing barcode reader verification system possess the main disadvantage “line of sight “ .The radar communication security system overcomes the barcode readers line of sight problem. This system also possessed a problem. It is that, it takes a longer time to respond as well as the instrumentation setup and the logical analysis of the system proved to be costlier. These problems were solved by the RFID technology. The solution will be briefly discussed in this paper.
APPLICATIONS:
• Used in educational laboratories.
• Used in automobiles.
[attachment=67516]
Abstract:
Security has become a prominent parameter for all the electronic gadgets. This proposed paper aims at securing the automotive and also preventing the unauthorized persons from accessing it. The technologies such as Radio Frequency Identification (RFID), thumb registration system and face recognition will be applied for the security measures. This proposed system will also be implemented in LabVIEW using Educational Laboratory Virtual Instrumentation Suite II (ELVIS). Initially, the RFID system will be authenticated .The importance of this system is that, it gets verification from the Road Transportation Office (RTO).The user will require an authentication to get proceed to the thumb registration module by which the efficiency of the thumb is enhanced using Pattern Matching Algorithm (PMA). Face recognition system is a technique which will be used after the thumb registration system. At last, this system allows the user to drive the car. For emergency, a key insertion slot will be placed in the system through which the user can insert the key. During this emergency mode of operation the camera captures the driver’s image and sends it to the owner’s mobile as Multimedia Messaging Service (MMS). The owner will provide the authentication password; this in turn allows the user to drive the vehicle. Global System for Mobile communication (GSM) module is also kept inbuilt for tracking purpose. Among the different technologies proposed, RFID technique is briefly discussed in this paper.
Introduction:
Recent surveys conducted by United States of America (USA) reported, about 625 vehicles are stolen in an average for a day .The present security system lacks in providing the tighten security to the automotive. The ultimate aim of this paper is to provide a hi-tech security to the automotive .The existing barcode reader verification system possess the main disadvantage “line of sight “ .The radar communication security system overcomes the barcode readers line of sight problem. This system also possessed a problem. It is that, it takes a longer time to respond as well as the instrumentation setup and the logical analysis of the system proved to be costlier. These problems were solved by the RFID technology. The solution will be briefly discussed in this paper.
APPLICATIONS:
• Used in educational laboratories.
• Used in automobiles.