04-09-2014, 03:03 PM
The tool room is well equipped with all facilities to fulfil the above operations. Whenever there is need of a new machine for a particular operation, the machine is first designed by the shop supervisor of the tool room and of shop for which it is required. After designing the various parameters, the fabrication is done in tool room. The designing is done by combination effort of shop supervisor of the tool room and of section in which tool are required. The fabrications of these tools are done in tool room. Some dies for the radiator plant are also made in tool room. The various machines installed for purpose of the manufacturing new machines, repairing old machines and making jigs, fixtures and dies are written below: • Lathe machine (KIRLOSKER) BED- 6inches Used for making pulleys, spacers, check nuts or any general work. • Lathe machine (KIRLOSKER) Bed- 6 inches Used for any general work • Lathe machine (KIRLOSKER) Bed- 6 inches Used for any general work • Lathe machine (KIRLOSKER) Bed- 4.5 inches
PROCEDURES FOR HEAT TREATMENT • Procedure for control of heat treatment. Purpose: - To ensure that the process is carries out under the controlled conditions by qualified operators to ensure that specific requirements are met. Scope: - This process covers all items requiring heat treatment. Responsibility: - Section in charge is responsible for implementation to this procedure. HOD works and plant in charge are overall responsible for implementation of this procedure. • Procedure for material storage and material handling at shop floor. Purpose: - To ensure proper handling, damage free movement and proper storage of material during the process. Scope: - It covers all the activities related to material handling and storage for all the material being processed at shop floor. Responsibility: - All section in charge and plant in charge are responsible for effective implementation of this procedure in respective areas H.O.D works is responsible.
PROCEDURES FOR HEAT TREATMENT • Procedure for control of heat treatment. Purpose: - To ensure that the process is carries out under the controlled conditions by qualified operators to ensure that specific requirements are met. Scope: - This process covers all items requiring heat treatment. Responsibility: - Section in charge is responsible for implementation to this procedure. HOD works and plant in charge are overall responsible for implementation of this procedure. • Procedure for material storage and material handling at shop floor. Purpose: - To ensure proper handling, damage free movement and proper storage of material during the process. Scope: - It covers all the activities related to material handling and storage for all the material being processed at shop floor. Responsibility: - All section in charge and plant in charge are responsible for effective implementation of this procedure in respective areas H.O.D works is responsible.