11-10-2014, 01:53 PM
Abstracts: An Abrasive Water Jet is a jet of water which contains abrasive material. Usually the water exits a nozzle at a high speed and the abrasive material is injected into the jet stream. The purpose of the abrasive water jet is to perform machining or finishing operation such as cutting etc. The use of the abrasive water jet for machining or finishing purposes is based on the principle of erosion of the material upon which the jet hits. In present history experimental investigation is going to be conducted in order to optimize the process parameter (Pressure, Standoff Distance (SOD), Abrasive Flow Rate, material, Traverse Speed) responses (MRR and SR) for ductile material (Al7075) and brittle material (Glass). The approach based on Artificial Neural Network (ANN), for optimize the abrasive water jet machining process parameters for effective machining and to predict the optimal choice for each Abrasive Water Jet Machining (AWJM). Pressure, Traverse speed and Stand of distance impact huge effect on MRR and SR. After varying pressure, got different MRR. At high pressure and maximum traverse speed got MRR is maximum.