09-01-2016, 02:29 PM
AIM:
The aim of this project is to monitor the occurrence of any faults at different channels without any human interface. Here with the help of sensors we are monitoring the different parameters.
PURPOSE:
By using this kind of projects in industries we can reduce the man power for continuous operation the accuracy of the work will be more and also there will be less chances of damaging the devices.
DESCRIPTION:
This project is to monitor the occurrence of any faults in industries without any human interface. Here with the help of sensors we are monitoring the different parameters from different channels. Sensors will produce analogical data but controller will not understand this data so here ADC is used convert the data from analog to digital. Output of the ADC is given to the microcontroller, controller process this data and compares with the predefined data. If this data exceeds the threshold then GSM modem will activate and message is sent to the concerned person via SMS through network paths. The fault is indicated by an alarm and leds and Readings of the parameters are displayed on the LCD.
The aim of this project is to monitor the occurrence of any faults at different channels without any human interface. Here with the help of sensors we are monitoring the different parameters.
PURPOSE:
By using this kind of projects in industries we can reduce the man power for continuous operation the accuracy of the work will be more and also there will be less chances of damaging the devices.
DESCRIPTION:
This project is to monitor the occurrence of any faults in industries without any human interface. Here with the help of sensors we are monitoring the different parameters from different channels. Sensors will produce analogical data but controller will not understand this data so here ADC is used convert the data from analog to digital. Output of the ADC is given to the microcontroller, controller process this data and compares with the predefined data. If this data exceeds the threshold then GSM modem will activate and message is sent to the concerned person via SMS through network paths. The fault is indicated by an alarm and leds and Readings of the parameters are displayed on the LCD.