08-10-2016, 04:01 PM
[attachment=72776]
Introduction
1. World Is A Storehouse Of Energy. We All Know That Energy Can Neither Be Created Nor Be Destroyed But It Can Be Transformed One Form To Another. However, We Are Wasting The Resources That Can Develops The Energy. 2. The First Wind Powered Electricity Was Produced By A Machine Built By Charles F. Brush In Cleveland, Ohio In 1888. It Had A Rated Power Of 12 Kw (Direct Current - DC). Direct Current Electricity Production Continued In The Form Of Small-scale, Stand-alone (Not Connected To A Grid) Systems Until The 1930's When The First Large Scale AC Turbine Was Constructed In The USA. There Was Then A General Lull In Interest Until The 1970's.
The motor changes electrical energy into mechanical energy by spinning of the shaft. Some motors can be operated as generators to convert mechanical energy into electrical energy like a dynamo. 1. Dynamo - A device that makes direct current electric power using electromagnetism. It is also called as a generator; however, the term generator normally refers to an "alternator" which develops AC (Alternative Current) power. 2. Generator - normally this term is used to describe an alternator which develops & AC power utilizing electromagnetism.
Wind turbine motor is used to generate electricity. Permanent magnet motor can be used as a generator for battery charging. The spinning shaft turns the electromagnets that are surrounded by heavy coils of copper wire inside generators. This creates a magnetic field, which causes the electrons in the copper wire to move from atom to atom, creating electricity. The voltage produced by A generator depends upon the number of turns in its coils, the strength of the magnet, and the rate at which the magnet turns. The more turns in the coils, the more voltage is produced.
The Dynamo is used to convert mechanical energy to electrical energy. Alternating current can be produced normally using the dynamo. This current can be used to charge AC/DC devices directly instead of storing it in a battery and use the same. If suppose the devices are use. then the power generated can be stored in a battery. The amount of power generated from a dynamo is sufficient to power the devices, which require low power.
Wind turbine motor is used to develops electricity. Wind turbine is a clean energy power plant. it is a performed positive work done because it’s fins are rotated by wind power the created electricity and our ceiling fans or vehicles, we can say it’s like a negative work done system, because it works when electricity or fuel supplied respectively. but we can converts it’s power output into input of a electric device.
it will be connected along a four wheels car through a mechanism in which the rotating of wheel will rotate dynamo’s shaft. It will be connected in such a way that as the number of spin of wheels raised the spinning of the shaft of AC dynamo increases times the voltage is also generated. The voltage generated will be given to the charging circuit which will be converted to DC .Then it will be given to the some voltage battery and by need of an inverter circuit and a step up transformer this voltage may be converted to more volts and used for other external purpose.
Advantages 1) Colleges, hospitals, hostels are equipped along at least 50 fans where this energy generating mechanism may be used to light up the tube lights or charge a battery and power up other devices like computers ,laptops etc. 2) In order to charge cell phone we need a mobile charging circuit, which would give the appropriate voltage, and current required for charging the mobile and will be helpful to middle class people to save energy and money.
Similarly This Concept Used In Car moving wind can do work in the turning the blades of wind mail. Thus, a moving body is capable of doing work and hence possesses energy. I am talking about my innovative idea on WHEEL POWER which is a useful source of energy and can be stored and used easily. Lacs of vehicles like Car, Bus, Trucks, Vans ,Scooter, Motorcycles and Trains all run on wheels daily. Whenever a vehicle moves its wheels rotates and generate some energy unless until we stop the vehicle. My idea is simple that we should collect this energy from the moving wheels of the vehicle and use it. We shall install a device on the wheels of the vehicle to collect the energy from the moving wheels and save the energy in batteries to generate extra power. Our research and development organization under the Ministry of Science and Technology and the Automobiles companies and Railways can develop such a device to preserve the energy from the driven wheels and store them in batteries which will be cost
Use of small and compact Dynamo. Dynamo is such a device which can convert the mechanical energy into electrical energy. Rotators has to be fixed on the rim of the wheels which will rotate when the wheel moves. The mechanical energy produced by rotators will go into the electric generator and it will convert the mechanical energy into electrical energy which can be used as and when required in the vehicle and can also be used for household purposes by tapping in rechargeable batteries. Like dynamo used in bicycle.
Another technique is used in every moving systems like wheels of car, motorbike etc. If wheels shaft take as a rotor then we have only providing magnetic coil Winding ,stator and charging circuit. this construction working like as dynamo when wheel is rotated due to shaft rotated that time electricity generated . This circuit is connected to the battery circuit. So that time battery will be charge.
when the battery is fully charge that time, we can drive our car without fuel because due to these electricity car will run using electric power. Suppose in car used these technique, then it stored 4times more electricity, because it has 4wheels which are rotated. Hence, Our car gives the more mileage, because electricity is generated by rotating speed of wheel by which of fuel energy. Then our new generation car will become semi-electric car.
7.Conclusion One such alternate way to generate power is presented in this paper .The spinning energy of the dynamo, can be used to operate several small powered devices like an air conditioning compressor Both dynamo and alternator can be used. The various applications where this power can be used are charging of laptops, magnetic braking system, cell phones, semi-electric cars etc. This system used in car to increase the efficiency of engine more than today cars.
Introduction
1. World Is A Storehouse Of Energy. We All Know That Energy Can Neither Be Created Nor Be Destroyed But It Can Be Transformed One Form To Another. However, We Are Wasting The Resources That Can Develops The Energy. 2. The First Wind Powered Electricity Was Produced By A Machine Built By Charles F. Brush In Cleveland, Ohio In 1888. It Had A Rated Power Of 12 Kw (Direct Current - DC). Direct Current Electricity Production Continued In The Form Of Small-scale, Stand-alone (Not Connected To A Grid) Systems Until The 1930's When The First Large Scale AC Turbine Was Constructed In The USA. There Was Then A General Lull In Interest Until The 1970's.
The motor changes electrical energy into mechanical energy by spinning of the shaft. Some motors can be operated as generators to convert mechanical energy into electrical energy like a dynamo. 1. Dynamo - A device that makes direct current electric power using electromagnetism. It is also called as a generator; however, the term generator normally refers to an "alternator" which develops AC (Alternative Current) power. 2. Generator - normally this term is used to describe an alternator which develops & AC power utilizing electromagnetism.
Wind turbine motor is used to generate electricity. Permanent magnet motor can be used as a generator for battery charging. The spinning shaft turns the electromagnets that are surrounded by heavy coils of copper wire inside generators. This creates a magnetic field, which causes the electrons in the copper wire to move from atom to atom, creating electricity. The voltage produced by A generator depends upon the number of turns in its coils, the strength of the magnet, and the rate at which the magnet turns. The more turns in the coils, the more voltage is produced.
The Dynamo is used to convert mechanical energy to electrical energy. Alternating current can be produced normally using the dynamo. This current can be used to charge AC/DC devices directly instead of storing it in a battery and use the same. If suppose the devices are use. then the power generated can be stored in a battery. The amount of power generated from a dynamo is sufficient to power the devices, which require low power.
Wind turbine motor is used to develops electricity. Wind turbine is a clean energy power plant. it is a performed positive work done because it’s fins are rotated by wind power the created electricity and our ceiling fans or vehicles, we can say it’s like a negative work done system, because it works when electricity or fuel supplied respectively. but we can converts it’s power output into input of a electric device.
it will be connected along a four wheels car through a mechanism in which the rotating of wheel will rotate dynamo’s shaft. It will be connected in such a way that as the number of spin of wheels raised the spinning of the shaft of AC dynamo increases times the voltage is also generated. The voltage generated will be given to the charging circuit which will be converted to DC .Then it will be given to the some voltage battery and by need of an inverter circuit and a step up transformer this voltage may be converted to more volts and used for other external purpose.
Advantages 1) Colleges, hospitals, hostels are equipped along at least 50 fans where this energy generating mechanism may be used to light up the tube lights or charge a battery and power up other devices like computers ,laptops etc. 2) In order to charge cell phone we need a mobile charging circuit, which would give the appropriate voltage, and current required for charging the mobile and will be helpful to middle class people to save energy and money.
Similarly This Concept Used In Car moving wind can do work in the turning the blades of wind mail. Thus, a moving body is capable of doing work and hence possesses energy. I am talking about my innovative idea on WHEEL POWER which is a useful source of energy and can be stored and used easily. Lacs of vehicles like Car, Bus, Trucks, Vans ,Scooter, Motorcycles and Trains all run on wheels daily. Whenever a vehicle moves its wheels rotates and generate some energy unless until we stop the vehicle. My idea is simple that we should collect this energy from the moving wheels of the vehicle and use it. We shall install a device on the wheels of the vehicle to collect the energy from the moving wheels and save the energy in batteries to generate extra power. Our research and development organization under the Ministry of Science and Technology and the Automobiles companies and Railways can develop such a device to preserve the energy from the driven wheels and store them in batteries which will be cost
Use of small and compact Dynamo. Dynamo is such a device which can convert the mechanical energy into electrical energy. Rotators has to be fixed on the rim of the wheels which will rotate when the wheel moves. The mechanical energy produced by rotators will go into the electric generator and it will convert the mechanical energy into electrical energy which can be used as and when required in the vehicle and can also be used for household purposes by tapping in rechargeable batteries. Like dynamo used in bicycle.
Another technique is used in every moving systems like wheels of car, motorbike etc. If wheels shaft take as a rotor then we have only providing magnetic coil Winding ,stator and charging circuit. this construction working like as dynamo when wheel is rotated due to shaft rotated that time electricity generated . This circuit is connected to the battery circuit. So that time battery will be charge.
when the battery is fully charge that time, we can drive our car without fuel because due to these electricity car will run using electric power. Suppose in car used these technique, then it stored 4times more electricity, because it has 4wheels which are rotated. Hence, Our car gives the more mileage, because electricity is generated by rotating speed of wheel by which of fuel energy. Then our new generation car will become semi-electric car.
7.Conclusion One such alternate way to generate power is presented in this paper .The spinning energy of the dynamo, can be used to operate several small powered devices like an air conditioning compressor Both dynamo and alternator can be used. The various applications where this power can be used are charging of laptops, magnetic braking system, cell phones, semi-electric cars etc. This system used in car to increase the efficiency of engine more than today cars.