24-11-2010, 02:04 PM
[attachment=7251]
FEATURES INCLUDE
• Multi-Function Power Assembly
• Compact Size – 9” H X 17.60” W X 11.00” D
• DC Bus Voltages to 850VDC
• Snubber-less operation to 650VDC
• Switching frequencies to over 20kHz
• Protective circuitry with fail-safe opto-isolated fault annunciation,
including:
• Over current
• Over voltage
• Short circuit
• P.S. undervoltage
• Over Temperature
• Opto-isolated or fiber-optic gate drive and fault signal output for
electrical isolation and noise immunity
• Integrated cooling with temperature sensors and feedback
• Many options
Configurable Power
The SixPac™ is a flexible, highly integrated IGBT based power assembly with a wide range of applications. These include inverters for motor controls, switch mode power supplies (SMPS), UPS, welders, etc. The SixPac™ can be operated at frequencies to over 20kHz. The SixPac™ can be configured as a full bridge or three-phase bridge inverter mounted on an air-cooled or liquid-cooled heat sink. Configurations include options for (full, half or no control) converter input circuitry, inverter output circuitry, cooling and a wide variety of drivers and safety features for the converter front end and IGBT inverter output stage. To operate at high switching frequencies, the SixPac™ utilizes a low inductance laminated bus structure, optically isolated or fiber optically coupled gate drive interfaces, isolated gate power supplies and a DC-link capacitor bank.
The SixPac™ provides built in protection features including: over voltage, under voltage lockout, over current, over temperature, short circuit and optional airflow or liquid flow indicators. Flexibility is a key feature of the SixPac™. Options include: a choice of converter front ends, rectifier, half or full SCR control, with or without SCR gate firing boards and soft-start circuitry. A choice of cooling methods, forced air or liquid is also available. Customer provided PWM is optically coupled or a fiber optic link can be provided to the IGBT interface. Current feedback is provided by Hall effect transducers. The SixPac™ is rated to maximum input voltages up to 850 VDC, switching frequencies to over 20kHz, includes many safety features to protect the IGBTs and output circuitry and can be configured to meet your application.
IAP200T120 SixPac™
200A / 1200V 3-Phase Bridge IGBT Inverter
200A / 1200V 3-Phase Bridge IGBT Inverter
FEATURES INCLUDE
• Multi-Function Power Assembly
• Compact Size – 9” H X 17.60” W X 11.00” D
• DC Bus Voltages to 850VDC
• Snubber-less operation to 650VDC
• Switching frequencies to over 20kHz
• Protective circuitry with fail-safe opto-isolated fault annunciation,
including:
• Over current
• Over voltage
• Short circuit
• P.S. undervoltage
• Over Temperature
• Opto-isolated or fiber-optic gate drive and fault signal output for
electrical isolation and noise immunity
• Integrated cooling with temperature sensors and feedback
• Many options
Configurable Power
The SixPac™ is a flexible, highly integrated IGBT based power assembly with a wide range of applications. These include inverters for motor controls, switch mode power supplies (SMPS), UPS, welders, etc. The SixPac™ can be operated at frequencies to over 20kHz. The SixPac™ can be configured as a full bridge or three-phase bridge inverter mounted on an air-cooled or liquid-cooled heat sink. Configurations include options for (full, half or no control) converter input circuitry, inverter output circuitry, cooling and a wide variety of drivers and safety features for the converter front end and IGBT inverter output stage. To operate at high switching frequencies, the SixPac™ utilizes a low inductance laminated bus structure, optically isolated or fiber optically coupled gate drive interfaces, isolated gate power supplies and a DC-link capacitor bank.
The SixPac™ provides built in protection features including: over voltage, under voltage lockout, over current, over temperature, short circuit and optional airflow or liquid flow indicators. Flexibility is a key feature of the SixPac™. Options include: a choice of converter front ends, rectifier, half or full SCR control, with or without SCR gate firing boards and soft-start circuitry. A choice of cooling methods, forced air or liquid is also available. Customer provided PWM is optically coupled or a fiber optic link can be provided to the IGBT interface. Current feedback is provided by Hall effect transducers. The SixPac™ is rated to maximum input voltages up to 850 VDC, switching frequencies to over 20kHz, includes many safety features to protect the IGBTs and output circuitry and can be configured to meet your application.