09-05-2011, 10:40 AM
FEATURES
ANALOG I/O
8-channel, 247 kSPS, 12-Bit ADC
DC performance: ±1 LSB INL
AC performance: 71 dB SNR
DMA controller for high speed ADC-to-RAM capture
2 12-bit (monotonic) voltage output DACs
Dual output PWM/Σ-Δ DACs
On-chip temperature sensor function: ±3°C
On-chip voltage reference
Memory
62 kB on-chip Flash/EE program memory
4 kB on-chip Flash/EE data memory
Flash/EE, 100 Yr retention, 100,000 cycles of endurance
2304 bytes on-chip data RAM
8051-based core
8051-compatible instruction set (16 MHz maximum)
32 kHz external crystal, on-chip programmable PLL
12 interrupt sources, 2 priority levels
Dual data pointer
Extended 11-bit stack pointer
On-chip peripherals
Time interval counter (TIC)
UART, I2C, and SPI Serial I/O
Watchdog timer (WDT), power supply monitor (PSM)
Power
Specified for 3 V and 5 V operation
Normal, idle, and power-down modes
Power-down: 25 μA @ 3 V with wake-up timer running
APPLICATIONS
Optical networking—laser power control
Base station systems
Precision instrumentation, smart sensors
Transient capture systems
DAS and communications systems
Upgrade to ADuC812 systems; runs from 32 kHz
External crystal with on-chip PLL.
Also available: ADuC831 pin-compatible upgrade to existing ADuC812 systems that require additional code or data memory; runs from 1 MHz to 16 MHz
External crystal
FUNCTIONAL BLOCK DIAGRAM
Figure 1.
GENERAL DESCRIPTION
The ADuC832 is a complete, smart transducer front end, integrating a high performance self-calibrating multichannel 12-bit ADC, dual 12-bit DACs, and programmable 8-bit MCU on a single chip.
The device operates from a 32 kHz crystal with an on-chip PLL, generating a high frequency clock of 16.78 MHz. This clock is, in turn, routed through a programmable clock divider from which the MCU core clock operating frequency is generated. The microcontroller core is an 8052 and is therefore 8051 instruction set compatible with 12 core clock periods per machine cycle. 62 kB of nonvolatile Flash/EE program memory are provided on chip. There are also 4 kB of nonvolatile Flash/EE data memory, 256 bytes of RAM, and 2 kB of extended RAM integrated on chip.
The ADuC832 also incorporates additional analog functionality with two 12-bit DACs, a power supply monitor, and a band gap reference. On-chip digital peripherals include two 16-bit Σ-Δ DACs, a dual-output 16-bit PWM, a watchdog timer, time interval counter, three timers/counters, Timer 3 for baud rate generation, and serial I/O ports (SPI, I2C®, and UART).
Download full report
http://www.analogstatic/imported-files/d...DUC831.pdf
ANALOG I/O
8-channel, 247 kSPS, 12-Bit ADC
DC performance: ±1 LSB INL
AC performance: 71 dB SNR
DMA controller for high speed ADC-to-RAM capture
2 12-bit (monotonic) voltage output DACs
Dual output PWM/Σ-Δ DACs
On-chip temperature sensor function: ±3°C
On-chip voltage reference
Memory
62 kB on-chip Flash/EE program memory
4 kB on-chip Flash/EE data memory
Flash/EE, 100 Yr retention, 100,000 cycles of endurance
2304 bytes on-chip data RAM
8051-based core
8051-compatible instruction set (16 MHz maximum)
32 kHz external crystal, on-chip programmable PLL
12 interrupt sources, 2 priority levels
Dual data pointer
Extended 11-bit stack pointer
On-chip peripherals
Time interval counter (TIC)
UART, I2C, and SPI Serial I/O
Watchdog timer (WDT), power supply monitor (PSM)
Power
Specified for 3 V and 5 V operation
Normal, idle, and power-down modes
Power-down: 25 μA @ 3 V with wake-up timer running
APPLICATIONS
Optical networking—laser power control
Base station systems
Precision instrumentation, smart sensors
Transient capture systems
DAS and communications systems
Upgrade to ADuC812 systems; runs from 32 kHz
External crystal with on-chip PLL.
Also available: ADuC831 pin-compatible upgrade to existing ADuC812 systems that require additional code or data memory; runs from 1 MHz to 16 MHz
External crystal
FUNCTIONAL BLOCK DIAGRAM
Figure 1.
GENERAL DESCRIPTION
The ADuC832 is a complete, smart transducer front end, integrating a high performance self-calibrating multichannel 12-bit ADC, dual 12-bit DACs, and programmable 8-bit MCU on a single chip.
The device operates from a 32 kHz crystal with an on-chip PLL, generating a high frequency clock of 16.78 MHz. This clock is, in turn, routed through a programmable clock divider from which the MCU core clock operating frequency is generated. The microcontroller core is an 8052 and is therefore 8051 instruction set compatible with 12 core clock periods per machine cycle. 62 kB of nonvolatile Flash/EE program memory are provided on chip. There are also 4 kB of nonvolatile Flash/EE data memory, 256 bytes of RAM, and 2 kB of extended RAM integrated on chip.
The ADuC832 also incorporates additional analog functionality with two 12-bit DACs, a power supply monitor, and a band gap reference. On-chip digital peripherals include two 16-bit Σ-Δ DACs, a dual-output 16-bit PWM, a watchdog timer, time interval counter, three timers/counters, Timer 3 for baud rate generation, and serial I/O ports (SPI, I2C®, and UART).
Download full report
http://www.analogstatic/imported-files/d...DUC831.pdf