01-03-2012, 04:25 PM
[u]A transistor is a semiconductor device used to amplify [/u]
[attachment=17853]
A transistor is a semiconductor device used to amplify and switch electronic signals. It is made of a solid piece of semiconductor material, with at least three terminals for connection to an external circuit. A voltage or current applied to one pair of the transistor's terminals changes the current flowing through another pair of terminals. Because the controlled (output) power can be much more than the controlling (input) power, the transistor provides amplification of a signal. Today, some transistors are packaged individually, but many more are found embedded in integrated circuits.
The transistor is the fundamental building block of modern electronic devices, and is ubiquitous in modern electronic systems. Following its release in the early 1950s the transistor revolutionized the field of electronics, and paved the way for smaller and cheaper radios, calculators, and computers, among other things.
A replica of the first working transistor.
Physicist Julius Edgar Lilienfeld filed the first patent for a transistor in Canada in 1925, describing a device similar to a field-effect transistor (FET).[1] However, Lilienfeld did not publish any research articles about his devices,[citation needed] nor did his patent cite any examples of devices actually constructed. In 1934, German inventor Oskar Heil patented a similar device.[2]
From 1942 Herbert Mataré experimented with so-called duodiodes while working on a detector for a Doppler RADAR system. The duodiodes he built had two separate but very close metal contacts on the semiconductor substrate. He discovered effects that could not be explained by two independently operating diodes and thus formed the basic idea for the later point contact transistor.
Usage
The bipolar junction transistor (BJT) was the most commonly used transistor in the 1960s and 70s. Even after MOSFETs became widely available, the BJT remained the transistor of choice for many analog circuits such as simple amplifiers because of their greater linearity and ease of manufacture. Desirable properties of MOSFETs, such as their utility in low-power devices, usually in the CMOS configuration, allowed them to capture nearly all market share for digital circuits; more recently MOSFETs have captured most analog and power applications as well, including modern clocked analog circuits, voltage regulators, amplifiers, power transmitters and motor drivers.
Simplified operation
This section does not cite any references or sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (November 2010)
[attachment=17853]
A transistor is a semiconductor device used to amplify and switch electronic signals. It is made of a solid piece of semiconductor material, with at least three terminals for connection to an external circuit. A voltage or current applied to one pair of the transistor's terminals changes the current flowing through another pair of terminals. Because the controlled (output) power can be much more than the controlling (input) power, the transistor provides amplification of a signal. Today, some transistors are packaged individually, but many more are found embedded in integrated circuits.
The transistor is the fundamental building block of modern electronic devices, and is ubiquitous in modern electronic systems. Following its release in the early 1950s the transistor revolutionized the field of electronics, and paved the way for smaller and cheaper radios, calculators, and computers, among other things.
A replica of the first working transistor.
Physicist Julius Edgar Lilienfeld filed the first patent for a transistor in Canada in 1925, describing a device similar to a field-effect transistor (FET).[1] However, Lilienfeld did not publish any research articles about his devices,[citation needed] nor did his patent cite any examples of devices actually constructed. In 1934, German inventor Oskar Heil patented a similar device.[2]
From 1942 Herbert Mataré experimented with so-called duodiodes while working on a detector for a Doppler RADAR system. The duodiodes he built had two separate but very close metal contacts on the semiconductor substrate. He discovered effects that could not be explained by two independently operating diodes and thus formed the basic idea for the later point contact transistor.
Usage
The bipolar junction transistor (BJT) was the most commonly used transistor in the 1960s and 70s. Even after MOSFETs became widely available, the BJT remained the transistor of choice for many analog circuits such as simple amplifiers because of their greater linearity and ease of manufacture. Desirable properties of MOSFETs, such as their utility in low-power devices, usually in the CMOS configuration, allowed them to capture nearly all market share for digital circuits; more recently MOSFETs have captured most analog and power applications as well, including modern clocked analog circuits, voltage regulators, amplifiers, power transmitters and motor drivers.
Simplified operation
This section does not cite any references or sources. Please help improve this section by adding citations to reliable sources. Unsourced material may be challenged and removed. (November 2010)