07-05-2012, 12:48 PM
GSM BASED VEHICLE OVER SPEED AND ACCIDENT AREA CODE INFORMATION WITH FUEL CUT OFF
[attachment=21460]
SYNOPSIS
The Object of this concept is to detect the speed of the vehicle information also cutoff fuel if it exceeds set speed and accident information based on GSM. When the vehicle exceeds normal speed or in any case of accident automatically the information will be passes to the main control unit (owner).
This concept is very useful to the traffic police department in order to measure the speed of the vehicle. This project is also used to avoid the accident.
WORKING PRINCIPLE
This project is designed with micro controller, speed sensor and driver circuit with Relay and keypad. In this project we are using speed sensor as a speed detector. The speed parameter of the vehicle is first feed in to the microcontroller by using the potentiometer. When the vehicle exceeds the normal speed automatically the information will be passes to the particular person and alarm starts to produce sound. Also we can identify the information of the accident in cause on the vehicle. When we press the reset button automatically the control unit never passes any information to the owner or main control unit.
In micro controller we have already programmed. Here we update the speed by each second and compare with the set speed. The set speed can changeable through given keypad. If the current speed exceeds the set speed first time then it intimate in LCD by crossing speed limit. Even after the warning if it exceeds the limit again then it cuts the fuel to engine through relay connected with solenoid.
ADVANTAGES
Low cost
Easy implementation
Low power consumption
More efficient
DISADVANTAGES
APPLICATIION
It can be installed in all vehicles particularly for old persons, learners and heart patients.
[attachment=21460]
SYNOPSIS
The Object of this concept is to detect the speed of the vehicle information also cutoff fuel if it exceeds set speed and accident information based on GSM. When the vehicle exceeds normal speed or in any case of accident automatically the information will be passes to the main control unit (owner).
This concept is very useful to the traffic police department in order to measure the speed of the vehicle. This project is also used to avoid the accident.
WORKING PRINCIPLE
This project is designed with micro controller, speed sensor and driver circuit with Relay and keypad. In this project we are using speed sensor as a speed detector. The speed parameter of the vehicle is first feed in to the microcontroller by using the potentiometer. When the vehicle exceeds the normal speed automatically the information will be passes to the particular person and alarm starts to produce sound. Also we can identify the information of the accident in cause on the vehicle. When we press the reset button automatically the control unit never passes any information to the owner or main control unit.
In micro controller we have already programmed. Here we update the speed by each second and compare with the set speed. The set speed can changeable through given keypad. If the current speed exceeds the set speed first time then it intimate in LCD by crossing speed limit. Even after the warning if it exceeds the limit again then it cuts the fuel to engine through relay connected with solenoid.
ADVANTAGES
Low cost
Easy implementation
Low power consumption
More efficient
DISADVANTAGES
APPLICATIION
It can be installed in all vehicles particularly for old persons, learners and heart patients.