09-05-2012, 10:39 AM
AUTOMATIC TOLL TAX COLLECTION SYSTEM
[attachment=21623]
BLOCK DIAGRAM DESCRIPTION:
The System consists of micro controller card. LCD is used to display current balance and other related messages. LED indication will be provided for ON/Off gate status.
Card reader will be used to read the data from the card. Memory is provided for future application such as any vehicle related data can be stored in it. The RTC will be used to display the current time on LCD.
On the spot recharge facility will be also provided in this system. For this PC is connected to the system. We can enter recharge code through PC to recharge the card by particular value.
We will use Micro Controller 89C51, MAX 232 level converter for PC interface, Serial memory AT24C04 and RTC DS1307, 16 *2 LCD etc.
The cards consist of memory 24C04 with SMD pack.
HARDWARE REQUIRMENT:
• Micro Controller 89C51
• MAX 232 level converter for PC interface,
• Serial memory AT24C04 and RTC DS1307,
• 16 *2 LCD.
• The cards consist of memory 24C04 with SMD pack.
SOFTWARE REQUIREMENT:
• 80C51 programming in embedded C
APPROXIMATE COST:
• The approximate cost of the project will be Rs.12,000/-
ADVANTAGES:
• Properly implemented, system can reduce congestion.
• Increase operating efficiency.
• Improve travel time.
• Reduce pollution.
• Improve safety of the roadway facility and surrounding corridors.
• Provide general vehicle/traffic monitoring and
Data collection.
APPLICATIONS:
• Incident management.
• Alternate route guidance.
• Travel demand management.
[attachment=21623]
BLOCK DIAGRAM DESCRIPTION:
The System consists of micro controller card. LCD is used to display current balance and other related messages. LED indication will be provided for ON/Off gate status.
Card reader will be used to read the data from the card. Memory is provided for future application such as any vehicle related data can be stored in it. The RTC will be used to display the current time on LCD.
On the spot recharge facility will be also provided in this system. For this PC is connected to the system. We can enter recharge code through PC to recharge the card by particular value.
We will use Micro Controller 89C51, MAX 232 level converter for PC interface, Serial memory AT24C04 and RTC DS1307, 16 *2 LCD etc.
The cards consist of memory 24C04 with SMD pack.
HARDWARE REQUIRMENT:
• Micro Controller 89C51
• MAX 232 level converter for PC interface,
• Serial memory AT24C04 and RTC DS1307,
• 16 *2 LCD.
• The cards consist of memory 24C04 with SMD pack.
SOFTWARE REQUIREMENT:
• 80C51 programming in embedded C
APPROXIMATE COST:
• The approximate cost of the project will be Rs.12,000/-
ADVANTAGES:
• Properly implemented, system can reduce congestion.
• Increase operating efficiency.
• Improve travel time.
• Reduce pollution.
• Improve safety of the roadway facility and surrounding corridors.
• Provide general vehicle/traffic monitoring and
Data collection.
APPLICATIONS:
• Incident management.
• Alternate route guidance.
• Travel demand management.