09-05-2012, 01:14 PM
DEPARTMENT OF ECE
[attachment=21667]
Existing system:
In early system the manual operation is required for monitoring the values and hence the efficiency is seems to less.
In this system the faults occur in the power plant is just indicated through buzzers and using LCD displays.
It’s somewhat uncomfortable; to eliminate this drawback we go for a newer, efficient and simpler system.
Proposed system:
This project presents the construction and design of automated industrial parameter monitoring system. The parameters of the power plant are continuously monitored with the help of the voltage and current sensors. The microcontroller unit monitors the status of the power plant data’s continuously using comparator circuit and corresponding sensors.
The measured values are given as an input to the microcontroller, which it is programmed to able to transmit the signal continuously. In case the parameters have reached a certain abnormal value, the alert message is transferred to the receiver section based on wireless communication. Controller intimates through a voice message to the workers using landline. To automatically dial the number in the landline phone we use relays.
OPERATION:
The parameters of the power plant are continuously monitored with the help of the voltage and current sensors. The microcontroller unit monitors the status of the power plants data continuously by using comparator circuit and corresponding sensors.
The measured values are given as an input to the microcontroller, which is programmed to be able to transmit the signal continuously.
In case the parameters have reached a certain abnormal value the alert message is transferred to the receiver section based on wireless communication by using GSM.
The controller also intimates through a voice message to the workers by using mobile phone.
Micro controller
A Micro controller consists of a powerful CPU tightly coupled with memory RAM,ROM or EPROM, various I/O features such as Serial ports, Parallel ports, Timer / Counter, Interrupt Controller, Data Acquisition interfaces-Analog to Digital converter(ADC), Digital to Analog converter(DAC), everything integrated onto a Single Silicon Chip.
[attachment=21667]
Existing system:
In early system the manual operation is required for monitoring the values and hence the efficiency is seems to less.
In this system the faults occur in the power plant is just indicated through buzzers and using LCD displays.
It’s somewhat uncomfortable; to eliminate this drawback we go for a newer, efficient and simpler system.
Proposed system:
This project presents the construction and design of automated industrial parameter monitoring system. The parameters of the power plant are continuously monitored with the help of the voltage and current sensors. The microcontroller unit monitors the status of the power plant data’s continuously using comparator circuit and corresponding sensors.
The measured values are given as an input to the microcontroller, which it is programmed to able to transmit the signal continuously. In case the parameters have reached a certain abnormal value, the alert message is transferred to the receiver section based on wireless communication. Controller intimates through a voice message to the workers using landline. To automatically dial the number in the landline phone we use relays.
OPERATION:
The parameters of the power plant are continuously monitored with the help of the voltage and current sensors. The microcontroller unit monitors the status of the power plants data continuously by using comparator circuit and corresponding sensors.
The measured values are given as an input to the microcontroller, which is programmed to be able to transmit the signal continuously.
In case the parameters have reached a certain abnormal value the alert message is transferred to the receiver section based on wireless communication by using GSM.
The controller also intimates through a voice message to the workers by using mobile phone.
Micro controller
A Micro controller consists of a powerful CPU tightly coupled with memory RAM,ROM or EPROM, various I/O features such as Serial ports, Parallel ports, Timer / Counter, Interrupt Controller, Data Acquisition interfaces-Analog to Digital converter(ADC), Digital to Analog converter(DAC), everything integrated onto a Single Silicon Chip.