01-08-2012, 03:28 PM
Door
[attachment=29906]
A door is a movable structure used to open and close off an entrance, typically consisting of a panel that swings on hinges or that slides or rotates inside of a space.
When open, they admit ventilation and light. The door is used to control the physical atmosphere within a space by enclosing the air drafts, so that interiors may be more effectively heated or cooled. Doors are significant in preventing the spread of fire. They also act as a barrier to noise.
They are also used to screen areas of a building for aesthetics, keeping formal and utility areas separate. Doors also have an aesthetic role in creating an impression of what lies beyond. Doors are often symbolically endowed with ritual purposes, and the guarding or receiving of the keys to a door, or being granted access to a door can have special significance.[1] Similarly, doors and doorways frequently appear in metaphorical or allegorical situations, literature and the arts, often as a portent of change.
Applications
Architectural doors have numerous general and specialized uses. Doors are generally used to separate interior spaces (rooms, closets, etc.) for privacy, convenience, security, and safety reasons. Doors are also used to secure passages into a building from the exterior for reasons of safety and climate control.
Doors also are applied in more specialized cases:
• A trapdoor is a door that is oriented horizontally in a floor or ceiling, often accessed via a ladder.
• Blast-proof doors are constructed to allow access to a structure but also to provide protection from the force of explosions.
• A garden door is any door that opens to a garden or backyard. It is often used specifically for double French doors in place of a sliding glass door (also known as Patio doors). In such a configuration, it has the advantage of a very large opening for moving large objects in and out.
• A pet door (also known as a dog door or cat flap) is an opening in a door to allow pets to enter and exit without the main door being opened. It may be simply covered by a rubber flap or it may be an actual door hinged on the top that the pet can push through. Pet doors may be mounted in a sliding glass door as a new (permanent or temporary) panel. Pet doors may be unidirectional, only allowing pets to exit. Pet doors may be electronic, only allowing pets with a special electronic tag to enter.
Many kinds of doors have specific names, depending on their purpose. The most common variety of door is the single-leaf door which consists of a single rigid panel that fills the doorway. Many variations on this basic design are possible, such as the double-leaf door or double doors and French doors that have two adjacent independent panels hinged on each side of the doorway.
A half door or Dutch door or stable door is divided in half horizontally. Traditionally the top half can be opened to allow a horse or other animal to be fed, while the bottom half remained closed to keep the animal inside. This style of door has been adapted for homes.
Saloon doors are a pair of lightweight swing doors often found in public bars, and especially associated with the American west. Saloon doors, also known as cafe doors, often use bidirectional hinges which close the door regardless of which direction it is opened by incorporating springs. Saloon doors that only extend from knee-level to chest-level are known as batwing doors.
A blind door or Gibb door is a door with no visible trim or operable components. It is designed to blend with the adjacent wall in all finishes, and visually to be a part of the wall, a disguised door.
A barn door is a door characteristic of a barn. They are often/always found on barns, and because of a barn's immense size (often) doors are subsequently big for utility.
A French door is a door (installed singly or as one of a matching pair or series) consisting of a frame around one or more transparent and/or translucent panels (called lights or lites); it is also called a French window as it resembles a door-height casement window. A pair of French doors does not generally include a central mullion (as do some casement window pairs), thus allowing a wider unobstructed opening. The frame typically requires a weather strip at floor level and where the doors meet to prevent water ingress. An espagnolette bolt allows the head and foot of each door to be secured in one movement. The slender window joinery maximizes light though into the room and minimizes the visual impact of the doorway joinery when considered externally.
A louvred door has fixed or movable wooden fins (often called slats or louvers) which permit open ventilation while preserving privacy and preventing the passage of light to the interior. Being relatively weak structures, they are most commonly used for wardrobes and drying rooms, where security is of less importance than good ventilation, although a very similar structure is commonly used to form window shutters.
A composite door is a single leaf door that can be solid or with glass, and is usually filled with high density foam. Most composite doors carry Secured by Design accreditation and PAS 23 and PAS 2
A flush door is a completely smooth door, having plywood or MDF fixed over a light timber frame, the hollow parts of which are often filled with a cardboard core material. Skins can also be made out of hardboards, the first of which was invented by William H Mason in 1924. Called Masonite, its construction involved pressing and steaming wood chips into boards. Flush doors are most commonly employed in the interior of a dwelling, although slightly more substantial versions are occasionally used as exterior doors, especially within hotels and other buildings containing many independent dwellings.
A moulded door has the same structure as that of flush door. The only difference is that the surface material is a moulded skin made of MDF. Skins can also be made out of hardboards, the first of which was invented by William H Mason in 1924. Called Masonite, its construction involved pressing and steaming wood chips into boards. Molded doors are commonly used as interior doors.
A ledge and brace door is a door made from multiple vertical planks fixed together by two horizontal planks (the ledges) and kept square by a diagonal plank (the brace).
A wicket door is a pedestrian door built into a much larger door allowing access without requiring the opening of the larger door. Examples might be found on the ceremonial door of a cathedral or in a large vehicle door in a garage or hangar.
A bifold door is a door unit that has several sections, folding in pairs. Wood is the most common material, and doors may also be metal or glass. Bifolds are most commonly made for closets, but may also be used as units between rooms.
A sliding glass door, sometimes called an Arcadia door or a Patio door, is a door made of glass that slides open and sometimes has a screen (a removable metal mesh that covers the door).
Australian doors are a pair of plywood swinging doors often found in Australian public houses. These doors are generally red or brown in color and bear a resemblance to the more formal doors found in other British Colonies' public houses.
A false door is a wall decoration that looks like a door. In ancient Egyptian architecture, this was a common element in a tomb, the false door representing a gate to the afterlife. They can also be found in the funerary architecture of the desert tribes (e.g., Libyan Ghirza).
Panel doors
Panel doors, also called stile and rail doors, are built with frame and panel construction:
• Stiles - Vertical boards that run the full height of a door and compose its right and left edges. The hinges are mounted to the fixed side (known as the "hanging stile"), and the handle, lock, bolt, and/or latch are mounted on the swinging side (known as the "latch stile").
• Rails - Horizontal boards at the top, bottom, and optionally in the middle of a door that join the two stiles and split the door into two or more rows of panels. The "top rail" and "bottom rail" are named for their positions. The bottom rail is also known as "kick rail". A middle rail at the height of the bolt is known as the "lock rail", other middle rails are commonly known as "cross rails".
• Mullions - Smaller optional vertical boards that run between two rails, and split the door into two or more columns of panels, the term is used sometimes for verticals in doors, but more often (UK and Australia) it refers to verticals in windows.
• Muntin - Optional vertical members that divide the door into smaller panels.
• Panels - Large, wider boards used to fill the space between the stiles, rails, and mullions. The panels typically fit into grooves in the other pieces, and help to keep the door rigid. Panels may be flat, or in raised panel designs.
• Light or Lite - a piece of glass used in place of a panel, essentially giving the door a window.
Plank and batten doors
Plank and batten doors are an older design consisting primarily of vertical slats:
• Planks - Vertical boards that extend the full height of the door, and are placed side by side filling the door's width.
• Battens - Smaller slats that extend horizontally across the door which the planks are affixed to. The battens hold the planks together. Sometimes a long diagonal slat or two are also implemented to prevent the door from skewing. On some doors, especially antique ones, the battens are replaced with iron bars that are often built into the hinges as extensions of the door-side plates.
Ledged and braced doors
This type consists of vertical tongue and grooved boards held together with battens and diagonal braces.
Impact-Resistant doors
Impact Resistant doors have rounded stile edges to dissipate energy and minimize edge chipping, scratching and denting. The formed edges are often made of an engineered material such as Acrovyn. Impact-resistant doors excel in high traffic areas such as hospitals, schools, and hotels.
Frame and filled doors
This type consists of a solid timber frame, filled on one face, face with Tongue and Grooved boards. Quite often used externally with the boards on the weather face.
[attachment=29906]
A door is a movable structure used to open and close off an entrance, typically consisting of a panel that swings on hinges or that slides or rotates inside of a space.
When open, they admit ventilation and light. The door is used to control the physical atmosphere within a space by enclosing the air drafts, so that interiors may be more effectively heated or cooled. Doors are significant in preventing the spread of fire. They also act as a barrier to noise.
They are also used to screen areas of a building for aesthetics, keeping formal and utility areas separate. Doors also have an aesthetic role in creating an impression of what lies beyond. Doors are often symbolically endowed with ritual purposes, and the guarding or receiving of the keys to a door, or being granted access to a door can have special significance.[1] Similarly, doors and doorways frequently appear in metaphorical or allegorical situations, literature and the arts, often as a portent of change.
Applications
Architectural doors have numerous general and specialized uses. Doors are generally used to separate interior spaces (rooms, closets, etc.) for privacy, convenience, security, and safety reasons. Doors are also used to secure passages into a building from the exterior for reasons of safety and climate control.
Doors also are applied in more specialized cases:
• A trapdoor is a door that is oriented horizontally in a floor or ceiling, often accessed via a ladder.
• Blast-proof doors are constructed to allow access to a structure but also to provide protection from the force of explosions.
• A garden door is any door that opens to a garden or backyard. It is often used specifically for double French doors in place of a sliding glass door (also known as Patio doors). In such a configuration, it has the advantage of a very large opening for moving large objects in and out.
• A pet door (also known as a dog door or cat flap) is an opening in a door to allow pets to enter and exit without the main door being opened. It may be simply covered by a rubber flap or it may be an actual door hinged on the top that the pet can push through. Pet doors may be mounted in a sliding glass door as a new (permanent or temporary) panel. Pet doors may be unidirectional, only allowing pets to exit. Pet doors may be electronic, only allowing pets with a special electronic tag to enter.
Many kinds of doors have specific names, depending on their purpose. The most common variety of door is the single-leaf door which consists of a single rigid panel that fills the doorway. Many variations on this basic design are possible, such as the double-leaf door or double doors and French doors that have two adjacent independent panels hinged on each side of the doorway.
A half door or Dutch door or stable door is divided in half horizontally. Traditionally the top half can be opened to allow a horse or other animal to be fed, while the bottom half remained closed to keep the animal inside. This style of door has been adapted for homes.
Saloon doors are a pair of lightweight swing doors often found in public bars, and especially associated with the American west. Saloon doors, also known as cafe doors, often use bidirectional hinges which close the door regardless of which direction it is opened by incorporating springs. Saloon doors that only extend from knee-level to chest-level are known as batwing doors.
A blind door or Gibb door is a door with no visible trim or operable components. It is designed to blend with the adjacent wall in all finishes, and visually to be a part of the wall, a disguised door.
A barn door is a door characteristic of a barn. They are often/always found on barns, and because of a barn's immense size (often) doors are subsequently big for utility.
A French door is a door (installed singly or as one of a matching pair or series) consisting of a frame around one or more transparent and/or translucent panels (called lights or lites); it is also called a French window as it resembles a door-height casement window. A pair of French doors does not generally include a central mullion (as do some casement window pairs), thus allowing a wider unobstructed opening. The frame typically requires a weather strip at floor level and where the doors meet to prevent water ingress. An espagnolette bolt allows the head and foot of each door to be secured in one movement. The slender window joinery maximizes light though into the room and minimizes the visual impact of the doorway joinery when considered externally.
A louvred door has fixed or movable wooden fins (often called slats or louvers) which permit open ventilation while preserving privacy and preventing the passage of light to the interior. Being relatively weak structures, they are most commonly used for wardrobes and drying rooms, where security is of less importance than good ventilation, although a very similar structure is commonly used to form window shutters.
A composite door is a single leaf door that can be solid or with glass, and is usually filled with high density foam. Most composite doors carry Secured by Design accreditation and PAS 23 and PAS 2
A flush door is a completely smooth door, having plywood or MDF fixed over a light timber frame, the hollow parts of which are often filled with a cardboard core material. Skins can also be made out of hardboards, the first of which was invented by William H Mason in 1924. Called Masonite, its construction involved pressing and steaming wood chips into boards. Flush doors are most commonly employed in the interior of a dwelling, although slightly more substantial versions are occasionally used as exterior doors, especially within hotels and other buildings containing many independent dwellings.
A moulded door has the same structure as that of flush door. The only difference is that the surface material is a moulded skin made of MDF. Skins can also be made out of hardboards, the first of which was invented by William H Mason in 1924. Called Masonite, its construction involved pressing and steaming wood chips into boards. Molded doors are commonly used as interior doors.
A ledge and brace door is a door made from multiple vertical planks fixed together by two horizontal planks (the ledges) and kept square by a diagonal plank (the brace).
A wicket door is a pedestrian door built into a much larger door allowing access without requiring the opening of the larger door. Examples might be found on the ceremonial door of a cathedral or in a large vehicle door in a garage or hangar.
A bifold door is a door unit that has several sections, folding in pairs. Wood is the most common material, and doors may also be metal or glass. Bifolds are most commonly made for closets, but may also be used as units between rooms.
A sliding glass door, sometimes called an Arcadia door or a Patio door, is a door made of glass that slides open and sometimes has a screen (a removable metal mesh that covers the door).
Australian doors are a pair of plywood swinging doors often found in Australian public houses. These doors are generally red or brown in color and bear a resemblance to the more formal doors found in other British Colonies' public houses.
A false door is a wall decoration that looks like a door. In ancient Egyptian architecture, this was a common element in a tomb, the false door representing a gate to the afterlife. They can also be found in the funerary architecture of the desert tribes (e.g., Libyan Ghirza).
Panel doors
Panel doors, also called stile and rail doors, are built with frame and panel construction:
• Stiles - Vertical boards that run the full height of a door and compose its right and left edges. The hinges are mounted to the fixed side (known as the "hanging stile"), and the handle, lock, bolt, and/or latch are mounted on the swinging side (known as the "latch stile").
• Rails - Horizontal boards at the top, bottom, and optionally in the middle of a door that join the two stiles and split the door into two or more rows of panels. The "top rail" and "bottom rail" are named for their positions. The bottom rail is also known as "kick rail". A middle rail at the height of the bolt is known as the "lock rail", other middle rails are commonly known as "cross rails".
• Mullions - Smaller optional vertical boards that run between two rails, and split the door into two or more columns of panels, the term is used sometimes for verticals in doors, but more often (UK and Australia) it refers to verticals in windows.
• Muntin - Optional vertical members that divide the door into smaller panels.
• Panels - Large, wider boards used to fill the space between the stiles, rails, and mullions. The panels typically fit into grooves in the other pieces, and help to keep the door rigid. Panels may be flat, or in raised panel designs.
• Light or Lite - a piece of glass used in place of a panel, essentially giving the door a window.
Plank and batten doors
Plank and batten doors are an older design consisting primarily of vertical slats:
• Planks - Vertical boards that extend the full height of the door, and are placed side by side filling the door's width.
• Battens - Smaller slats that extend horizontally across the door which the planks are affixed to. The battens hold the planks together. Sometimes a long diagonal slat or two are also implemented to prevent the door from skewing. On some doors, especially antique ones, the battens are replaced with iron bars that are often built into the hinges as extensions of the door-side plates.
Ledged and braced doors
This type consists of vertical tongue and grooved boards held together with battens and diagonal braces.
Impact-Resistant doors
Impact Resistant doors have rounded stile edges to dissipate energy and minimize edge chipping, scratching and denting. The formed edges are often made of an engineered material such as Acrovyn. Impact-resistant doors excel in high traffic areas such as hospitals, schools, and hotels.
Frame and filled doors
This type consists of a solid timber frame, filled on one face, face with Tongue and Grooved boards. Quite often used externally with the boards on the weather face.